MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Clutch fork pivot bracket for 1968-1972 big block bellhousings with casting numbers 2892259, 2892262, 2892626 and 2892513. Also correct for Lakewood big block bellhousing #15330. Replaces OE part number 2892263

Clutch fork pivot bracket for 1968-1972 C-body V8 applications with 4.807 bore bellhousings. Can also be used in 1962-65 B-body applications with 4.807 bore bellhousings, such as our BH513R, or 1970-72 aluminum bellhousing 2892513, and Lakewood safety bellhousings. Positions the clutch fork at the correct height for proper adjusting rod angle.

Clutch fork pivot bracket for 1969-1978 big block truck bellhousings with casting numbers 2899104, 3491637, 3497272, 4039670 and 1969-1980 small block truck bellhousings with casting numbers 3497270, 3893728.

Clutch fork pivot bracket for 1963-66 small block bellhousings with casting numbers 2463027, 2465523, 2468433, also for 10.5" bellhousings 2843887, 2892482 and 3515734 when used with our 10.5" conversion torque shaft kit in 1963-66 A-body cars.

New clutch fork pivot bracket for 1966-1967 big block B-body/1967-69 A-body big block bellhousings with 4.354" hole and casting numbers 2468370, 2468372, 2780512, 2843234, and 1970-74 E-body/71-4 B-body small blocks with casting numbers 2892482 and 3515734. Also fits Lakewood 15320 bell housing for B/E body small block applications. Replaces OE part number 2409680

Clutch fork pivot bracket for 1962-65 B-body applications with big block bellhousings casting numbers 2463019, 2468370, 2468372 and 2536106. Replaces OE part number 2260719

New clutch fork pivot bracket for 1968-1975 small block A-body cars with bell housing casting numbers 2843887, 2892482, 3515734. Also fits Lakewood 15320 bell housing for A-body small block applications. Replaces OE part number 2800848

Clutch fork pivot bracket for 1975 & up small block A/F-body cars with overdrive bellhousing casting number 3743859. OE 3743928

Clutch fork pivot bracket for cars needing to use short style (10 7/8" instead of 12 1/2") clutch fork with V8 overdrive bellhousing, casting number 3743859. Works for all 1966 to 1974 B & E body cars where the shorter fork is required. OE 3743929

Clutch fork pivot bracket for 1976-80 small block Dodge truck with overdrive bellhousing casting number 3743859, used with 12 1/2" long clutch fork (CF106R).

Good used clutch fork pivot bracket for 1976-80 small block Dodge truck with overdrive bellhousing casting number 3743859, used with 12 1/2" long clutch fork (CF106R).

Good used clutch fork pivot bracket for 1975 & up small block A/F-body cars with overdrive bellhousing casting number 3743859.

Clutch fork pivot bracket for 1963 big block 4-speed bellhousing casting number 2406293, and 1963-4 Max Wedge T-85 bellhousing casting numbers 2402219 and 2402221. 3 1/4" bolt spacing.

New clutch fork pivot ballstud, for ball pivot style clutch forks, as used in 1981-up A833 overdrive bell housings with casting numbers 4202506 and 4202507, 1981-up NP435 truck bell housing with casting number 4202508.

3" Fork spring only, holds clutch adjuster rod in place, fits 1963-65 B-body and 1963-up A-body cars.

4" Fork spring only, holds clutch adjuster rod in place, fits 1966-up B/E-body big and small block, 1967-69 A-body big block cars.

Hydraulic slave clutch actuating kit mounts between the side cover on any A833 transmission and the stock clutch fork, pulling the clutch fork back when pedal is pushed. Recommended only when stock, mechanical linkage cannot be used because of clearance issues with exhaust system or applications where motor/bellhousing are not in the stock location. Kit includes transmission bracket/pivot assembly, slave cylinder, master cylinder with reservoirs and hoses. Engineering and fabrication required to mount master cylinder through the firewall or a bracket to mount off of the pedal assembly frame. Recommended for diaphragm pressure plates only.

Torque shaft, fits all 1967-1976 A-body slant six applications. 8" tube length, good used. Reference Chrysler part number 2950251

Torque shaft, fits all 1967-1976 A-body small block V8 applications with 10.5" bellhousing. 7" tube length. Reference Chrysler part number 2950238

Torque shaft, fits 1967-1969 A-body big block applications with stock 10.5" bellhousing (will also work in 1970-1976 A-body big block cars with 10.5" bellhousings). Will NOT work with TTI headers. See TS252KIT for complete torque shaft kit.