View Cart

MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Home » CLUTCH LINKAGE / FORKS » All Products

 Checkout

TS252KIT TORQUE SHAFT KIT 1967-69 A-BODY BIG BLOCK

Details 

Complete torque shaft kit for 1967-69 A-body big block cars with stock 10.5" bellhousings. Includes (1) TS252 torque shaft (1) BSS481 spacer (2) HC916 bolts (1) BSB271 bellhousing ballstud/bracket (1) CSK parts kit (1) BS766F frame ballstud (1) BSW ballstud washer, and (1) BSN nut. Will NOT work with TTI headers.
Price: $229.95
Add to cart

TS354 TORQUE SHAFT 1962-65 B-BODY

Details 

Torque shaft, fits all 1962-1965 B-body V8 applications with 10.5" bellhousing.
Price: $89.95
Add to cart

TS636 TORQUE SHAFT 1963-66 A-BODY 10.5

Details 

Torque shaft fits 1963-1966 A-body applications when converting to 1968 & later 10.5" bellhousings. Requires use of our BSB636 bellhousing ballstud bracket, AK636 adjusting rod kit, FP484 fork pivot, and CF702N clutch fork..
Price: $89.95
Add to cart

TS913 TORQUE SHAFT 1970-1 E-BODY, 1971-4 B-BODY BIG BLOCK

Details 

Torque Shaft, fits big block 1970-1971 E-body/1971-4 B-body applications with 10.5" bellhousing (can also be used in 1972-4 cars when converting to big block). (WILL NOT FIT WITH 11" CAST IRON OR LAKEWOOD BELLHOUSINGS!, use TS914 and AK449) 9" tube length, lower offset adjuster arm welded 3/4" from end of tube, uses our AK450 adjusting rod kit.
Price: $89.95
Add to cart

TS914 TORQUE SHAFT 1966-70 B-BODY BIG BLOCK, 1970-74 E, 1971-4 B SMALL BLOCK

Details 

Torque Shaft, fits big block 1966-70 B-body, small block 1970-74 E-body & 1971-74 B-body applications. Also works in 1970 & later B/E-body cars when using earlier 11" cast iron or Lakewood bellhousing (tube usually needs shortened on bellhousing end with Lakewood bellhousing). 9" tube length, lower offset adjuster arm welded 1 1/4" from end of tube, uses our AK449 adjusting rod kit. Reference OE part numbers 2534 538 and 2950 914
Price: $89.95
Add to cart

TSP TORQUE SHAFT/CLUTCH PEDAL REPLACEMENT PIN

Details 

Torque shaft replacement pin, to replace damaged or worn pins on all torque shafts, also used on clutch pedal. Heat treated, welding required. Sold each.
Price: $5.95
Add to cart

TSW910 TORQUE SHAFT BEARING RETAINER WIRE

Details 

Torque shaft bearing retainer wire, small ends protrude through torque shaft tube holes on frame end (into the groove of bearing 1/2), then snaps over tube, holding torque shaft location on frame side. Fits all models, 1 per car.
Price: $5.95
Add to cart

« | 1 | 2 | 3 | 4 | 5 | 6 | Next »

Brewer's Performance

10510 State Route 571
Laura, OH 45337

PH: (937) 947-4416 or (937) 698-4259
FAX: (937) 947-4419
Monday-Friday 9AM-5PM