MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Countershaft plug for all A833 overdrive transmissions. 1 per transmission.

Reverse detent housing base gasket, 1.150" outside/.875" inside diameters. 1 per transmission.

Premium bearing retainer gasket for all A883 4-speeds with #307 front bearing. This gasket is manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket!

Bearing retainer gasket for transmissions with #308 front bearing.

Premium bearing retainer gasket for all A883 4-speeds with #308 front bearing. This gasket is manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket!

Backup light switch and/or reverse detent cap gasket, .925" outside/.565" inside diameters. 2 per transmission.

Premium extension housing (tail shaft) to main case gasket, for all A833 4-speeds. This gasket is manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torqueing, thus resulting in a torn or damaged gasket!

Premium paper gasket sets! Gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, and one each 307/308 bearing retainer gaskets. Reference WT294-55

Premium paper gasket sets! Gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, overdrive side cover (for aluminum main case), and one each 307/308 bearing retainer gaskets.

Premium side cover to main case gasket, for aluminum case A833 4-speed overdrive transmissions (with C13550 aluminum side cover with reverse detent spring retention). This gasket is manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torqueing, thus resulting in a torn or damaged gasket!

Premium side cover to main case gasket, for all A833 4-speeds. This gasket is manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torqueing, thus resulting in a torn or damaged gasket! Use with cast iron side covers with casting numbers C95664 and C99386.

Input shaft micro repair sleeve, thin sleeve fits over pitted/rusted or worn pinion seal area. Fits all 18 spline "Hemi" transmissions.

Side cover/gearshift lever shaft o-ring, all 4-speeds and overdrive A833 with cast iron side cover. 7/16 ID 5/8" OD. Sold each, 3 per transmission.

Side cover/gearshift lever shaft o-ring, all overdrive A833 with aluminum side cover. 5/8" ID 13/16" OD. Sold each, 3 per transmission.

Speedometer pinion adapter outer o-ring, seals housing to transmission case (1966 & later transmissions).

O-ring retainer, for all A833 aluminum overdrive transmissions, 1980-up. Good used, sold each, 3 per transmission. Used with OR114 o-rings. Reference OE # 3515793.

Bearing retainer pinion seal for all 1964-1987 A833 4-speeds/overdrives. 1.063 ID X 1.499 OD X .250 H

Bearing retainer pinion seal for all 1966-72 18 spline input A833 4-speeds. 1.187 ID X 1.720 OD X .248 H

Bearing retainer pinion seal installation tool, for all 18 and 23 spline transmissions. Select either 18/23 spline or both.

Speedometer pinion hole caplug, fits all 1966 and later A833 4-speeds, as well as 727/904 Torqueflite automatic transmissions, keeps dirt and small critters out of your transmission when stored!