MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Clutch adjusting rod grommet/insulator, fits all models.

Clutch adjuster kit for 1964-66 A-body Small block with 9.5” bellhousing. Includes adjusting rod, nut, washer, grommet, spring, clip/washer. Adjusting rod is 4 7/8" overall length

Clutch adjuster kit for 1962-65 B-body big block applications. Includes adjusting rod, nut, washer, grommet, spring, clip/washer. Adjusting rod is 4 7/8" overall length.

Clutch adjuster kit for 1967-1976 A-body small block applications, also 1975-up F-body. Includes adjusting rod, nut, washer, grommet, spring, clip/washer. Adjusting rod is 7 1/2" overall length.

Clutch adjuster kit for 1966-1979 B-body big or small block, 1970-4 E-body and 1971-4 B-body small block applications. (Should also be used in 1970-74 B/E big block applications when using 11" bellhousing and TS914 torque shaft). Also fits 1975-9 Chrysler Cordoba, 1975-8 Plymouth Sport Fury, 1977-8 Dodge Monaco, 1978-9 Dodge Magnum & 1979 Chrysler 300 Includes adjusting rod, nut, washer, grommet, spring, clip/washer. Adjusting rod is 4 7/8" overall length.

Clutch adjuster kit for 1970-1 E-body/1971-4 B-body big block applications, use with torque shaft TS913. (Will NOT fit 1970-74 B/E big block applications when using 11" bellhousing, use TS914 and AK449). Includes adjusting rod, nut, washer, grommet, spring, clip/washer. Adjusting rod is 4 7/8" overall length.

Clutch adjuster kit for original 1967-69 A-body big block applications, or conversion of any 1967-1976 A-body to big block. Includes adjusting rod, nut, washer, grommet, spring, clip/washer. Adjusting rod is 7 1/2" overall length.

Clutch adjuster kit for 1963-66 A-body small block applications using our 10.5" bell housing conversion parts. Use with TS636 torque shaft, BSB636 bell housing ball stud bracket, FP484 clutch fork pivot, and CF702 clutch fork. Includes adjusting rod, nut, washer, grommet, spring, clip/washer. Adjusting rod is 7 1/2" overall length.

Clutch adjusting rod nut, fits all models.

Clutch adjuster rod only, fits all 1967-76 A-body cars, big and small block, also 1975-up F-body cars. See AK448, AK451 or AK636 for complete adjusting rod kits. Adjusting rod is 7 1/2" overall length.

Clutch adjuster rod only, fits 1970-1 E-body and 1971-4 B-body big block cars using original torque shaft and 10.5" bellhousing. See AK450 for complete adjusting rod kit. Adjusting rod is 4 7/8" overall length.

Clutch adjuster rod only, fits 1964-70 B-body big block and 1970-4 E-body/1971-4 B-body small block. See AK449 for complete adjusting rod kit. Adjusting rod is 4 7/8" overall length.

Clutch adjusting rod washer, fits all models.

Replacement weld-in torque shaft ballstud for early 1962-65 B-body and most 1963-76 A-body V8 bellhousing ballstud brackets.

Replacement weld-in torque shaft ballstud for early 1962-65 B-body and most 1963-76 A-body slant six bellhousing ballstud brackets. Longer shank than standard V8 ballstuds.

Replacement weld-in frame bracket ballstud for early 1962-65 B-body and 1963-66 A-body frame ballstud brackets (Our FB718, FB718-O, and FB944).

Torque shaft bellhousing ballstud, screws directly into the bellhousing on 1966-1974 B-body big block, and 1970-4 E-body/1971-4 B-body small block cars. Shoulder is 7/8" diameter (compared to 1" diameter for frame side ball) allowing it to be pushed inside torque shaft tube during assembly. 1 per car.

Torque shaft frame end ballstud, used on all 1966-1974 B/E body and all 1967-1976 A-body cars. Shoulder is 1" diameter (compared to 7/8" diameter for bellhousing side ball). 1 per car, add nut and washer for $4.90

Bellhousing ballstud/bracket for 1967-69 A-body big block 383 cars, or any 1967-76 A-body big block conversions. Works on 10.5" bellhousings with casting numbers 2468370, 2468372 and 2892513, can also be used on Lakewood bellhousings, but modification may be required. Stock bellhousings require spacer BSS481, or see BSB271K for complete kit.

Bellhousing ballstud/bracket/spacer kit for 1967-69 A-body big block 383 cars, or any 1967-76 A-body big block conversions. Kit includes (1) BSB271 ballstud/bracket (1) BSS481 spacer and (2) HC916 bolts. Works on 10.5" bellhousings with casting numbers 2468370, 2468372 and 2892513, and BH513R and BH513R-S Brewer's Performance reproductions. Can also be used on Lakewood bellhousings, but modification may be required. See our TS252KIT for complete torque shaft kit.