MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Pressure plate bolt package 3/8-16, small head design for use with 10.95" "scalloped" pressure plates. Package of 6.

Pressure plate bolt package 5/16-18, small head design for use with 10.0" "scalloped" pressure plates, as used on some later 6 cylinder applications. Package of 6.

ARP Flywheel bolt package for 8-bolt crank flanges, 5.7, 6.1 & 6.4 Gen 3 Hemi (metric), package of 8.

Pressure plate bolt package, for standard 10.5" and 11" pressure plates. (Note: WILL NOT work with 10.95" or 11.95" "scalloped" pressure plates, see BP1500). Package of 6.

ARP Pressure plate bolt package, for standard 10.5" and 11" pressure plates. (Note: WILL NOT work with 10.95" or 11.95" "scalloped" pressure plates, see BP1500). Package of 6.

Flywheel bolt package, for all 6-bolt crank flanges. 7/16 X 20, package/6.

ARP flywheel bolt package for all 6-bolt crank flanges 7/16"-20 thread .875" long under head, 12 point, package of 6.

Flywheel bolt package for 8-bolt crank flanges (hemi & aftermarket) 1/2"-20 thread, package of 8.

ARP flywheel bolt package for 8-bolt crank flanges (hemi & aftermarket) 1/2"-20 thread .875" long under head, 12 point, package of 8.

New 122 tooth flywheel ring gear, fits 9.5" flywheels. 11.190" inside diameter, 12.276" outside.

New 130 tooth flywheel ring gear, fits 10.5" flywheels. 12.160" inside diameter, 13.195" outside.

New 143 tooth ring gear, fits 11" flywheels. 13.560" inside diameter, 14.568" outside.

New 172 tooth flywheel ring gear, fits 11" flywheels (used with direct drive starter) on 1966-69 426 Hemi applications. 13.561" inside diameter, 14.640" outside.

Reconditioned original flywheel, 8-bolt 11" 172 tooth ring gear (ring gear installed from engine side), for 1967-69 426 Hemi motors (using original direct drive starter), resurfaced, ring gears inspected, ready to install. Reference Chrysler part # 2863069.

New billet steel flywheel, 8-bolt 11" 172 tooth ring gear, for 1967-69 426 Hemi motors (using original direct drive starter). Reference Chrysler part # 2863069.

10.5" 130 tooth 8-bolt crank flange flywheel as used on 1970-71 Hemi cars, can also be used with most aftermarket/stroker crankshafts with 10.5" bellhousings. SFI approved, McLeod.

10.5" 130 tooth 6-bolt crank flange flywheel for V8 318/340/383/440 applications. SFI approved, McLeod. Please select balance option.

Aluminum McLeod SFI approved 6-bolt 10.5" 130 tooth flywheel, approximately 12 pounds, fits all neutral balance V8 applications.

Reconditioned flywheel, original 11" 143 tooth ring gear 2.16" register, for slant six (Dodge truck and some HD car applications) neutral balance, resurfaced, ring gears inspected, ready to install.

Lightweight (#18-#22) 10.5" 130 tooth 6-bolt crank flange flywheel for V8 318/340/383/440 applications. SFI approved, McLeod, neutral balance only. Can not be used with bolt on counter balance weight kits.