MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Foam axle retainer to backing plate gasket, all Dana 60 and 8 3/4 rearends, 2 required per car, sold each.

Metal axle housing to backing plate gasket, all Dana 60 and 8 3/4 rearends, 2 required per car, sold each.

Passenger's side rear axle locking pawl & nut, for all 1965 & up 8 3/4 and Dana 60 rear axles, holds the wheel bearing adjusting star in place after axle end play is set.

Lakewood axle shims 2 degree, pair. Mount between axle housing and leaf spring to correct pinion angle.

Lakewood axle shims 4 degree, pair. Mount between axle housing and leaf spring to correct pinion angle.

Inner axle seal, fits all 1965 to 1978 8 3/4 rear axle assemblies, 2.69" outside diameter, 1.50" inside diameter, two required per vehicle, sold each.

Outer wheel bearing seal (installs in retainer/adjuster plates), fits all 1965 to 1978 8 3/4 and 1966 to 1972 Dana 60 9 3/4 rear axle assemblies, two required per vehicle, sold each.

Inner axle seal, 2.502" outside diameter, 1.5" inside diameter, fits all 1966 to 1972 Dana 60 9 3/4 rear axle assemblies, two required per vehicle, sold each.

Dana 60 rear axle pinion snubber. Good used, fits 1966-1972 Dana 60 rear axles.

Replacement pinion snubber bumper, fits all Dana 60 and 8 3/4 pinion snubber brackets.

All new driveshaft built to your specifications, choice of 7260, 7290, or HD Spicer 1350 universal joints, 26 or 30 spline slip yoke, forged or billet slip yoke (add $95) and mild steel or 3" chromoly tube (add $120). Flat rate shipping $85 for lower 48 States. Includes straps/u-bolts for rear yoke. Note in comments the year, model, rear u-joint size, and 8 3/4 or Dana 60 rear axle. CUSTOM DRIVESHAFTS WITH AFTERMARKET 1350 U-JOINTS WILL REQUIRE MEASUREMENT WITH A 1350 SLIP YOKE IN PLACE (call for details).

All new driveshaft built to your measurement for 1964-65 ball/trunion transmissions, front coupler bolts to the transmission flange, with a slip spline yoke. Choice of 7260, 7290, or HD Spicer 1350 rear universal joint. Includes straps/u-bolts for rear yoke. Flat rate shipping $85 for lower 48 States.

3.23 axle ratio tag. For all 8 3/4 rear axles.

3.54 axle ratio tag. For all Dana 60 rear axles.

3.55 axle ratio tag. For all 8 3/4 rear axles.

3.91 axle ratio tag. For all 8 3/4 rear axles.

4.10 axle ratio tag. For all Dana 60 & 8 3/4 rear axles.

"USE SURE GRIP LUBE" TAG, 8 3/4 ROUND ALUMINUM.

"USE LIMITED SLIP DIFF. LUBE ONLY" tag, DANA 60, for all 1966-1972 Dana 60 rear axles.

Replacement stud and nut package for Mopar 8 3/4" and Dana 60 axle housing, retains backing plate/axles, set of 10.