MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Positive battery cable, fits 1970-71 E-body & 1971 B-body 426 Hemi 4-speed applications. #704 battery cable strap is included. Special order, allow 2-3 weeks for delivery.

Positive battery cable, fits 426 Hemi 1968-69 CHarger B-body 4-speed applications. Special order, allow 2-3 weeks for delivery.

Nice reproduction of the clip used to secure the right parking brake cable to the rear axle housing on Dana equipped cars. Also used to secure the left parking brake cable to the car body on most vehicles. Formed from correct gauge steel and includes 5/16-18 hex flange head bolt plated in zinc phosphate. Reference P/N 2534 931.

Parking brake strut levers for 1965-72 A-Body applications with 10" rear drum brakes. Set includes pair of strut lever springs. Right side lever stamped with "R". Reference Chrysler part number 2534 666-7.

Parking brake strut levers for 1971-75 11" rear drum brake applications for all body styles. Set includes pair of strut lever springs. Right side lever stamped with "R". Reference Chrysler part number 3580 750-1.

Parking brake strut levers for 1965-70 11" rear drum brake applications for all body styles. Set includes pair of strut lever springs. Right side lever stamped with "R". Reference Chrysler part number 2533 892-3.

Parking brake strut levers for 1965-74 B & E-Body and 1973-76 A-Body applications with 10" rear drum brakes. Also used on 1978-79 L'il Red Express Trucks with 10" rear drum brakes. Set includes pair of strut lever springs. Reference Chrysler part number 2409 823.

Positive crankcase ventilation valve, fits 1970-71 big block 383-440/426 hemi applications, and some small blocks. Three ribbed, includes PCV and breather grommets.

Positive crankcase ventilation valve, fits 1970-74 small block applications. No ribs, includes PCV and breather grommets.

Pentastar emblem for passenger's side front fender, correct plastic base with gold foil overlay, for all 1968 & later models, can also be used to replace 1963 to 1967 metal pentastars.

Gas pedal dress-up bezel, fits 1966-70 B-body cars. Nice reproduction.

For use on 1969 and later Big Block engines without Air Conditioning. Will fit both styles of Saginaw pumps. Includes the correct OE style fasteners to mount the pump to the brackets and the assembly to the water pump housing. Extra washer provided for use on water pump housing bolt in adjusting slot. POWDER COATED black for better appearance and longer life.

For use on 1967-72 Big Block & Hemi engines. Can be used on both A/C and non-A/C applications. Includes (3) OE correct 5/16-18 place bolts to attach the bracket to the pump and the bolt to mount the assembly to the water pump housing. The washer is provided for use on water pump housing bolt in adjusting slot. POWDER COATED low gloss black for better appearance and longer life.

An exact reproduction of a hard to find plug boot shield. Bolts to the fourth HP exhaust manifold stud from the front to protect #7 spark plug wire boot. For use on mid-1969 and later B and E-Body HP Big Block applications.

An exact reproduction of a hard to find plug boot shield. This spark plug shield bolts under the sixth and seventh head bolt to protect #6 and #8 spark plug wire boots. Correct for mid-1969 and later HP Big Block applications.

An exact reproduction of a hard to find plug boot shield. This spark plug shield bolts under the sixth and seventh head bolt to protect #6 and #8 spark plug wire boots. Correct for 1967-1969 HP Big Block applications. A second shield is required on HP C-Body and Big Block A-Body Applications to protect #5 and #7 spark plug wire boots.

An exact reproduction of a hard to find early version plug boot shield. Bolts to the fourth left side exhaust manifold stud from the front to protect #7 spark plug wire boot. For use on 1967 through mid-1969 B-Body HP Big Block applications.

The kit includes (2) powder coated formed steel brackets, (4) correct 1/4-20 cage nuts for the radiator side brackets, and (4) 1/4-20 x 1/2" hex head coni sems bolts to mount the brackets to the radiator. Used on 1969-73 B-Body and all E-Body cars with the 2949 130 or 2998 328 fan shroud and 22" radiator. Also used on 1969-72 C-Body cars and 1972-79 Dodge trucks with 22" radiator.

The kit includes (4) powder coated formed steel brackets, (4) correct 1/4-20 cage nuts for the radiator side brackets, and (8) 1/4-20 x 1/2" hex head coni sems bolts to mount the parts together. Used on 1962-65 B-Body cars with steel fan shrouds and 22" radiators.

The kit includes (4) powder coated formed steel brackets, (4) correct 1/4-20 cage nuts for the radiator side brackets, and (8) 1/4-20 x 1/2" hex head coni sems bolts to mount the parts together. Used on 1966-68 B-Body cars with steel fan shrouds and 22" radiators.