MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Steering column collars, for converting column shift/automatic steering columns for floor shift/4-speed applications. For 1970 A/B/E body cars.

Steering column collars, for converting column shift/automatic steering columns for floor shift/4-speed applications. For 1971-UP A/B/E body cars.

Shaker/vent/air grabber cable firewall grommet. Fits 15/16" hole. Has embossed part number 2276552, licensed Chrysler product.

Speedometer cable grommet for 63-76 A, 64-76 B, and 70-4 E. Fits 15/16" hole in firewall, hole in center is large enough to fit over the white plastic fitting on 1968-up speedometer cables. Important Installation Note: Customers have asked how to get this grommet over the end of the plastic ferrule on the later model speedo cables or the nut on the earlier speedo cables. I have included a picture showing the grommet stretched over a 1/2" drive 3/8" socket. I used some WD40 to help get the grommet on the socket. The large end of the socket can be placed over / next to the ferrule or nut and then slid onto the cable.

Shaker/vent/air grabber control cable grommet, fits 15/16" hole in firewall, center hole small to seal around cable.

Speedometer cable to firewall grommet for 62-63 B bodies and 62-70 C bodies. Fits 1.187" hole in firewall. Mopar Part# 1971861 2426712.

Six pack carburetor linkage kit.

Torsion bar boot and clip package, fits all A-B-E models. Authentic Mopar approved reproduction.

Torsion bar clip package, fits all A-B-E models.

New throttle cable, fits all 1962-65 B-body models with 361-383-426 four barrel. 20.5" overall length.

New throttle cable, fits all 1968-70 B-body models with 383-440 four barrel. 21" overall length.

New throttle cable, fits 1969-70 B-body models with 440 six pack. 21.25" overall length.

New throttle cable, fits all 1970-74 E-body and 1971-74 B-body models with 340 360 383 440 V8 engines. 22" overall length.

New throttle cable, fits all 1970-71 E-body and 1971 B-body models with 426 Hemi and 440-6 pack V8 engines. 23" overall length.

Max wedge throttle cable, all 1962-64 models. 23.5" overall length.

Race hemi throttle (accelerator) cable. 25" overall length.

1966-70 B-body Street hemi throttle (accelerator) cable. 19.5" overall length.

1967-70 440 Big Block Throttle Cable Mounting Bracket complete with hold down and phosphated hex coni keps nut. Can be used on two- and four-barrel engines. Will also fit earlier engines but is not exact replica of original part. Use for both 4-speed and automatic transmission applications. Remove pin and spacer for use with 4-speed.

0060 1968-70 Small Block Four-Barrel Throttle Cable Mounting Bracket complete with hold down and phosphated hex coni keps nut. Use for both 4-speed and automatic transmission applications. Remove pin and spacer for use with 4-speed.

340 Six Pack Throttle Cable Mounting Bracket complete with zinc plated hold down and correct hex coni keps nut. Use for both 4-speed and automatic transmission applications.