MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Bellhousing to starter seal, fits between starter and bellhousing to seal out dirt and water, also shims starter for proper starter drive to ring gear engagement. Used on 10.5" big block bellhousings with casting numbers 2402219, 2406042, 2406293, 2463019, 2463236, 2468370, 2468372, 2536106, 2892513, BH513R and BH513R-S Brewer's Performance reproductions, and all big block 727 automatics.

Bellhousing to starter seal, fits between starter and bellhousing to seal out dirt and water, also shims starter for proper starter drive to ring gear engagement. Used on big block 11" bellhousings with casting numbers 2843234, 2892262, 2892626 and 11" truck bellhousings with casting numbers 2899104, 3491637, 3497272 and 4039670.

Bellhousing to engine block bolt and washer package, includes 6 washers and bolts. Fits all big block 4-speed applications.

Bellhousing to engine block bolt and washer package, includes 7 bolts/5 washers. Fits all small block 4-speed applications.

Starter to bellhousing hardware package, includes correct stud, lockwasher, nut and captured washer bolt. Fits all 1962 and later applications with gear reduction starter. Will NOT work for 1966 to 1969 Hemi 4-speed application with direct drive starter.

Transmission to bellhousing bolt and washer package, includes 4 each correct external tooth washers and bolts. Fits all 4-speed applications.

Bearing retainer adapter ring, adapts 4.354" diameter transmission bearing retainer to fit 4.807" large hole bellhousings.

Bellhousing dust cover bolts for all cars, correct flanged washer and "23" on head, 5 required per car, sold each.

Special self-tapping screw, attatches lower edge of CHS911 starter seal to the front edge of DC892 bellhousing dust cover on all small block applications. Sold each, 2 required.

Adjustable .007 .014 or .021 offset dowel pins (pair) for correcting bell housing bore runout. Easily adjusted or removed by simply backing off set screw. Sized correctly for Mopar applications (0.496" diameter) Will work with small block Lakewood/aftermarket bell housings, can be modified for stock/aluminum small block bell housing applications, $12 additional.

Standard Mopar block dowel pins fit all engines. 0.496" diameter x 0.75" long. Sold each, 2 required.

Lightweight high torque mini starter, remove lug extension block for big block applications.

Starter adapter kit package, for use with Lakewood big block bellhousings (when using the smaller 130 tooth 10.5" flywheel). Special dowel/bracket is used to position starter inward, allowing proper engagement of the starter drive on the smaller diameter flywheel. Can be used on Lakewood safety bellhousings engineered for use with both 130 tooth/10.5" and 143 tooth/11" flywheels (identified by two holes in the starter pocket area where the snout support bolts in). Snout support is also included in the kit. Reference Lakewood 15905. For use with 15330 / 15335 bellhousings.