MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Quicktime small block safety bellhousing, SFI 6.1 approved, includes bellhousing, block plate, adapter ring for 4.354" diameter bearing retainer transmissions and all hardware, used with 130 tooth flywheel. For all A, B & E body applications. Fits 318-340-360 blocks.

Quicktime big block safety bellhousing, SFI 6.1 approved, includes bellhousing, block plate, adapter ring for 4.354" diameter bearing retainer transmissions and all hardware, used with 130 tooth flywheel. Fork pivot included, use our clutch fork CF702 for all A, B & E body applications. Fits 361-383-400-413-426W-426 Hemi and 440 blocks.

Lakewood bellhousing "block saver" plate, installs behind flywheel on engine block, protects block from damage in case of flywheel or clutch failure. For Lakewood small block bellhousing #15320. Plate only, hardware NOT included. Reference OE numbers 15781 and 96000278.

Good used Lakewood 15320 safety bellhousing, used with 130 tooth flywheel. Fits all 318-340 and 360 blocks, includes bellhousing, block saver plate, adapter ring for 4.354" diameter bearing retainer transmissions, and fork pivot FP680U for B & E body cars (used with CF702 clutch fork) or fork pivot FP848U for A body cars (used with CF106R clutch fork). Clutch fork NOT included.

Lakewood bellhousing "block saver" plate, installs behind flywheel on engine block, protects block from damage in case of flywheel or clutch failure. For Lakewood big block/Hemi bellhousing #15330. Reference OE 15765. Hardware not included.

Good used Lakewood safety bellhousing (no current SFI sticker) includes bellhousing, block saver plate, good used FP263 fork pivot, can be used with both 130 tooth and 143 tooth flywheels. Uses our CF702 clutch fork (NOT included). For all A, B & E body applications. Fits 361-383-400-413-426W-426 Hemi and 440 blocks.

Bolt package for all older Lakewood bell housings, using 3/8" bolts for the block saver to bell housing attachment. For all small and big block applications, includes (5) bell housing to block bolts/washers, (14) block saver to bell housing bolts/washers/nuts, and (2) starter mounting bolts/washers/nuts. For newer Lakewood bell housings (using 1/2" bolts for the block saver to bell housing) select BP-LAKE-LG.

Bearing retainer adapter ring, adapts 4.354" diameter transmission bearing retainer to fit 4.807" large hole bellhousings.

Starter adapter nose support cup, for Ansen big block bell housing.

Starter adapter nose support cup, for 15330 Lakewood bell housing.

Starter adapter kit package, for use with Lakewood big block bellhousings (when using the smaller 130 tooth 10.5" flywheel). Special dowel/bracket is used to position starter inward, allowing proper engagement of the starter drive on the smaller diameter flywheel. Can be used on Lakewood safety bellhousings engineered for use with both 130 tooth/10.5" and 143 tooth/11" flywheels (identified by two holes in the starter pocket area where the snout support bolts in). Snout support is also included in the kit. Reference Lakewood 15905. For use with 15330 / 15335 bellhousings.