MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Reconditioned 35 tooth first gear (with one wide identifying mark on tooth tips), fits 1975-80 overdrive transmissions with 1st design high helix fine pitch gear. Reference 3878650 T833-12B

New 35 tooth first gear, fits all 1964-1975 23 spline transmissions, and 1977 and later overdrive transmissions with 2nd design gear pitch. Reference 2464018 WT294-12

Reconditioned 35 tooth first gear, fits all 1964-1975 23 spline transmissions, and 1977 and later overdrive transmissions with 2nd design gear pitch.

Reconditioned 30 tooth second gear for 1975 up overdrive transmissions with 3.09 ratio low gear coarse pitch. Reference 3878431 T833-21G

Reconditioned 30 tooth second gear (with one wide identifying mark on tooth tips), fits 1975-80 overdrive transmissions with 1st design high helix fine pitch. Reference 3878649 T833-21F

Reconditioned 18 tooth fourth gear (overdrive gear) for 1975-up 23 spline overdrive transmissions with 3.09 ratio coarse pitch low gear. Reference 3878430 T833-11G

NOS 18 tooth fourth gear (overdrive gear) for 1975-up 23 spline overdrive transmissions with 3.09 ratio coarse pitch low gear. Reference 3878430 T833-11G

Reconditioned 20 tooth fourth gear (with one wide identifying mark on tooth tips), fits 1975-80 overdrive transmissions with 1st design high helix fine pitch. Reference 3878648 T833-11F

Billet steel bearing retainer 4.16" bolt circle, 23 spline transmissions with 308 front bearing and 5.125" outside diameter. Use with overdrive bell housings with casting numbers 3743643 3743859 4202506 4202507, replaces cast # C13157 original retainers. Gasket and seal included.

Reconditioned bearing retainer for 23 spline 4-speed overdrives, cast C13157 5.125" diameter, 4.16" bolt circle, 308 bearing. Includes gasket & pinion seal. See part number BR-157B for Billet retainer. See part numbers BR-796C, BR-619C, BR-621C BR-696 for new cast replacement retainers for other popular applications.

Billet steel bearing retainer 3.70" bolt circle, adapts any 23 spline transmissions with 307 front bearing to 5.125" outside diameter, to use with overdrive bell housings with casting numbers 3743643 3743859 4202506 4202507, replaces cast # C97728 original retainers. Gasket and seal included.

NOS bearing retainer for 23 spline 4-speed overdrives, cast C97728 5.125" diameter, 3.70" bolt circle, 307 bearing. Retainer only. OE part number 2960122.

Reconditioned bearing retainer for 23 spline 4-speed overdrives, cast C97728 5.125" diameter, 3.70" bolt circle, 307 bearing. Includes gasket & pinion seal. Also available in billet steel, see part #BR-728B.

Reconditioned cluster gear for 1975-77 overdrive transmissions with high helix gearset. Tooth count 36-42-27-17R-17. Reference 3878651 T833-8F

Reconditioned cluster gear for 1977-up overdrive transmissions with 3.09 low gear ratio. Tooth count 33-37-27-17R-17. Pictured is version with 2 rings on cluster/1st gear. Reference 3878432 T833-8G

Good used countershaft for all overdrive transmissions 10.420" (see our CS-294 for 4-speed). Reference 4028123 T833-3A

Countershaft plug for all A833 overdrive transmissions. 1 per transmission.

Aluminum extension housing casting number C-13386/C-13364 A for A-body overdrive (only)transmissions with 26 spline output/307 bearing. Baked and bead blasted.

Reconditioned gear set as used in 1977-up 23 spline overdrive transmissions with 3.09 to 1 low gear. Includes input shaft, cluster, 1st, 2nd and 4rd gears.

Good used 23 spline input shaft, 22 tooth drive gear, 3.09 to 1 first gear ratio. Fits 1964-65 A-body transmissions, some early 70's A-body transmissions, and 1975-up overdrive transmissions with 2nd design gear coarse pitch. Same as IS309. Reference 3743690 T833-16F