View Cart

MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Home » REBUILD KITS » Rebuild Kits - 23 Spline Overdrive

 Checkout
CS-T COUNTERSHAFT ARBOR TOOL
Product ID: CS-T

Details 

Countershaft arbor tool for all A833 transmissions, correct diameter and exact length shaft to hold rollers and thrust washers in place when installing cluster gear assembly in main case, made with DOM seamless tubing. (Same function as Miller tool C-3938).
Price: $9.95
Add to cart

RBK-MY6 BEARING, GASKET & SEAL REBUILD KIT GM MY6 NP440 (A833) TRUCK OVERDRIVE 10 SPLINE INPUT 2 WHEEL DRIVE
Product ID: RBK-MY6

Details 

Bearing and seal rebuild kit for GM (2 wheel drive) MY6 NP440 (A833) truck overdrive transmissions. Includes 308 main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Synchronizer stop rings sold separately.
SELECT NO SYNCHRONIZER STOP RINGS
ADD SR307 1970-UP LUG STYLE SYNCHRONIZER RINGS (+$49.95)
Price: $139.95
Add to cart

RBK07 BEARING, GASKET & SEAL REBUILD KIT A/F OVERDRIVE 23 SPLINE INPUT, CAST IRON CASE/EXTENSION
Product ID: RBK07

Details 

Bearing and seal rebuild kit for A/F-body overdrive transmissions (with cast iron main case/extension) with 23 spline input/30 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C13157 and extension/tail shaft housing C13212. Please verify your transmission before ordering. Synchronizer stop rings sold separately.
SELECT NO SYNCHRONIZER STOP RINGS
ADD SR307 1970-UP LUG STYLE SYNCHRONIZER RINGS (+$49.95)
SELECT ADD BLS814 BACKUP LIGHT SWITCH (+$24.95)
NO BLS814 BACKUP LIGHT SWITCH
Price: $129.95
Add to cart

RBK08 BEARING, GASKET & SEAL REBUILD KIT A OVERDRIVE 23 SPLINE INPUT 26 SPLINE OUTPUT, ALUMINUM CASE, CAST IRON SIDE COVER 308 FT BEARING 307 REAR
Product ID: RBK08

Details 

Bearing and seal rebuild kit for A-body overdrive transmissions (with aluminum main case/extension, cast iron side cover) with 23 spline input/26 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C13157 and extension/tail shaft housings C133 64A or C133 86. Please verify your transmission before ordering. Synchronizer stop rings sold separately.
SELECT NO SYNCHRONIZER STOP RINGS
ADD SR307 1970-UP LUG STYLE SYNCHRONIZER RINGS (+$49.95)
SELECT ADD BLS814 BACKUP LIGHT SWITCH (+$24.95)
NO BLS814 BACKUP LIGHT SWITCH
Price: $129.95
Add to cart

RBK08A BEARING, GASKET & SEAL REBUILD KIT A OVERDRIVE 23 SPLINE INPUT 26 SPLINE OUTPUT, ALUMINUM CASE/SIDE COVER  308 FT BEARING 307 REAR
Product ID: RBK08A

Details 

Bearing and seal rebuild kit for A-body overdrive transmissions (with aluminum main case/extension, aluminum side cover) with 23 spline input/26 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C13157 and extension/tail shaft housings C133 64A or C133 86. Please verify your transmission before ordering. Synchronizer stop rings sold seperately.
SELECT NO SYNCHRONIZER STOP RINGS
ADD SR307 1970-UP LUG STYLE SYNCHRONIZER RINGS (+$49.95)
SELECT ADD BLS814 BACKUP LIGHT SWITCH (+$24.95)
NO BLS814 BACKUP LIGHT SWITCH
Price: $129.95
Add to cart

RBK08AA BEARING, GASKET & SEAL REBUILD KIT A OVERDRIVE 23 SPLINE INPUT 26 SPLINE OUTPUT, ALUMINUM CASE, CAST IRON SIDE COVER 307 BEARINGS
Product ID: RBK08AA

Details 

Bearing and seal rebuild kit for A-body overdrive transmissions (with aluminum main case/extension, cast iron side cover) with 23 spline input/26 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets (except side cover gasket) supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C97728 and extension/tail shaft housings C133 64A or C133 86. Please verify your transmission before ordering. Synchronizer stop rings sold seperately.
SELECT NO SYNCHRONIZER STOP RINGS
ADD SR307 1970-UP LUG STYLE SYNCHRONIZER RINGS (+$49.95)
SELECT ADD BLS814 BACKUP LIGHT SWITCH (+$24.95)
NO BLS814 BACKUP LIGHT SWITCH
Price: $119.95
Add to cart

RBK09 BEARING, GASKET & SEAL REBUILD KIT A OVERDRIVE 23 SPLINE INPUT 30 SPLINE OUTPUT, ALUMINUM CASE/SIDE COVER
Product ID: RBK09

Details 

Bearing and seal rebuild kit for A-body overdrive transmissions (with aluminum main case/extension, aluminum side cover) with 23 spline input/30 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C13157 and extension/tail shaft housings C13212-2 or C13305. Please verify your transmission before ordering. Synchronizer stop rings sold separately.
SELECT NO SYNCHRONIZER STOP RINGS
ADD SR307 1970-UP LUG STYLE SYNCHRONIZER RINGS (+$49.95)
SELECT ADD BLS814 BACKUP LIGHT SWITCH (+$24.95)
NO BLS814 BACKUP LIGHT SWITCH
Price: $129.95
Add to cart

RBK09A BEARING, GASKET & SEAL REBUILD KIT A OVERDRIVE 23 SPLINE INPUT 30 SPLINE OUTPUT, ALUMINUM CASE/ CAST IRON SIDE COVER
Product ID: RBK09A

Details 

Bearing and seal rebuild kit for A-body overdrive transmissions (with aluminum main case/extension, cast iron side cover) with 23 spline input/30 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C13157 and extension/tail shaft housings C13212-2 or C13305. Please verify your transmission before ordering. Synchronizer stop rings sold separately.
SELECT NO SYNCHRONIZER STOP RINGS
ADD SR307 1970-UP LUG STYLE SYNCHRONIZER RINGS (+$49.95)
SELECT ADD BLS814 BACKUP LIGHT SWITCH (+$24.95)
NO BLS814 BACKUP LIGHT SWITCH
Price: $129.95
Add to cart

RBK10 BEARING, GASKET & SEAL REBUILD KIT LATE 1978 TO 1987 TRUCK OVERDRIVE 23 SPLINE INPUT, ALUMINUM CASE
Product ID: RBK10

Details 

Bearing and seal rebuild kit for late 1978 to 1987 truck overdrive transmissions (with aluminum main case) with 23 spline input/30 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C13157 and extension/tail shaft housings 99539. Please verify your transmission before ordering. Synchronizer stop rings sold separately.
SELECT NO SYNCHRONIZER STOP RINGS
ADD SR307 1970-UP LUG STYLE SYNCHRONIZER RINGS (+$49.95)
SELECT ADD BLS814 BACKUP LIGHT SWITCH (+$24.95)
NO BLS814 BACKUP LIGHT SWITCH
Price: $139.95
Add to cart

RBK10C BEARING, GASKET & SEAL REBUILD KIT 1976-78 TRUCK OVERDRIVE 23 SPLINE INPUT, CAST IRON CASE
Product ID: RBK10C

Details 

Bearing and seal rebuild kit for 1976 to 1978 truck overdrive transmissions (with cast iron main case) with 23 spline input/30 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket!This kit works with bearing retainer C13157 and extension/tail shaft housings 99539. Please verify your transmission before ordering. Synchronizer stop rings sold separately.
SELECT NO SYNCHRONIZER STOP RINGS
ADD SR307 1970-UP LUG STYLE SYNCHRONIZER RINGS (+$49.95)
SELECT ADD BLS814 BACKUP LIGHT SWITCH (+$24.95)
NO BLS814 BACKUP LIGHT SWITCH
Price: $139.95
Add to cart

SR-OD SYNCRONIZER SNAP RING
Product ID: SR-OD

Details 

Snap ring for all A833 overdrive transmissions, retains the 3-4 synchronizer on the front of the main shaft. Good used.
Price: $1.95
Add to cart

SR307 SYNCHRONIZER STOP RINGS LATE 1970-UP LUG STYLE SET/4
Product ID: SR307

Details 

Set of four synchronizer stop rings for late 1970-up transmissions, with oil bleeds, lug style, used in synchronizer assemblies with .380" wide keys. (Single rings available for $12.95 each, see SR307S). Reference 3515023 WT307-14
Price: $49.95
Add to cart

TRANSJEL GOLD TRANSMISSION ASSEMBLY LUBE 1LB
Product ID: TRANSJEL

Details 

Trans-Jel Gold is specifically formulated for use as an assembly lubricant for all automatic and manual transmissions. It lubricates and helps hold in place needle bearings, thrust washers, sealing rings, "O" rings, hydraulic seals and gaskets during assembly. Trans-Jel Gold remains smooth and stable at working temperatures, and is soluble in all transmission fluids and gear oil. 1 pound plastic tub.
Price: $18.95
Add to cart

Brewer's Performance

10510 State Route 571
Laura, OH 45337

PH: (937) 947-4416 or (937) 698-4259
FAX: (937) 947-4419
Monday-Friday 9AM-5PM