MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Good used interlock style side cover gearshift lever, used for both the 1-2 and 3-4 shift forks, fits late 1978 & newer A833 overdrive transmissions with the aluminum side cover, includes new flange nut. Sold each.

Good used reverse gearshift lever, fits late 1978 & newer A833 overdrive transmissions with the aluminum side cover, includes new flange nut. Sold each.

Gasket & seal kit for all A/F 23 spline aluminum case/extension housing overdrive A833 transmissions with 26 spline output. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, and 308 bearing retainer gaskets, front pinion & rear tail shaft seal, backup light switch gasket, gearshift lever shaft o-rings, speedometer adapter housing inner seal/outer o-ring, and countershaft plug.

Gasket & seal kit for all A/F 23 spline aluminum case/extension housing overdrive A833 transmissions with 30 spline output. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, and 308 bearing retainer gaskets, front pinion & rear tail shaft seal, backup light switch gasket, gearshift lever shaft o-rings, speedometer adapter housing inner seal/outer o-ring, and countershaft plug.

Gasket & seal kit for all A/F 23 spline aluminum case/extension housing/cast iron side cover overdrive A833 transmissions with 26 spline output. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, and 308 bearing retainer gaskets, front pinion & rear tail shaft seal, backup light switch gasket, gearshift lever shaft o-rings, speedometer adapter housing inner seal/outer o-ring, and countershaft plug.

Gasket & seal kit for all 1981-87 23 spline aluminum case/cast iron extension housing overdrive A833 truck transmissions. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, and 308 bearing retainer gaskets, front pinion & rear tail shaft seal, backup light switch gasket, gearshift lever shaft o-rings, speedometer adapter housing inner seal/outer o-ring, and countershaft plug.

Gasket & seal kit for all 1977-80 23 spline cast iron case/cast iron extension housing overdrive A833 A/F body and truck transmissions. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, and 308 bearing retainer gaskets, front pinion & rear tail shaft seal, reverse detent and backup light switch gaskets, gearshift lever shaft o-rings, speedometer adapter housing inner seal/outer o-ring, and countershaft plug.

Premium paper gasket sets! Gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, overdrive side cover (for aluminum main case), and one each 307/308 bearing retainer gaskets.

Gasket & seal kit for aluminum case MY6 NP440 GM version of the A833 transmissions. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, and 308 bearing retainer gaskets, front pinion & rear tail shaft seal, backup light switch gasket, gearshift lever shaft o-rings, and countershaft plug.

Reconditioned gear set as used in 1977-up 23 spline overdrive transmissions with 3.09 to 1 low gear. Includes input shaft, cluster, 1st, 2nd and 4rd gears.

Premium side cover to main case gasket, for aluminum case A833 4-speed overdrive transmissions (with C13550 aluminum side cover with reverse detent spring retention). This gasket is manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torqueing, thus resulting in a torn or damaged gasket!

Premium side cover to main case gasket, for all A833 4-speeds. This gasket is manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torqueing, thus resulting in a torn or damaged gasket! Use with cast iron side covers with casting numbers C95664 and C99386.

Good used 23 spline input shaft, 22 tooth drive gear, 3.09 to 1 first gear ratio. Fits 1964-65 A-body transmissions, some early 70's A-body transmissions, and 1975-up overdrive transmissions with 2nd design gear coarse pitch. Same as IS309. Reference 3743690 T833-16F

Good used 23 spline input shaft, 24 tooth drive gear (one small identifying groove on tips of teeth). Fits 1975-80 overdrive transmissions with 1st design high helix gear fine pitch. As available. Reference 3878647 T833-16E

NOS 23 spline input shaft, 24 tooth drive gear (one small identifying groove on tips of teeth). Fits 1975-80 overdrive transmissions with 1st design high helix gear fine pitch. Reference 3878647 T833-16E

Shifter linkage 3-OD rod and swivel, for A/F-body cars with overdrive A833 transmission and Hurst shifter mechanism (will NOT work with ITM shifter) reproduction of original. 17 1/2" overall length.

Shifter linkage rod set, fits 1975-up A/F-body models with original equipment Hurst shifter (will NOT work with ITM shifter) and overdrive operating levers. Includes 1-2 rod, 3-OD rod, reverse rod, 3 adjusting swivels, and clip/washer package.

Shifter linkage rod set, fits 1976-up Dodge trucks with A833 overdrive transmission. Good used rods, new swivels, new clip/washer package.

Shifter linkage 1-2 rod/swivel for 1976-up Dodge truck with A833 overdrive transmission. Good used. 10" overall length.

Shifter linkage 3-4 rod/swivel for 1976-up Dodge truck with A833 overdrive transmission. Good used. 13 3/4" overall length.