MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Speedometer pinion adapter outer o-ring, seals housing to transmission case (1966 & later transmissions).

Speedometer cable 0-ring, seals cable in tailshaft housing on 1965 & earlier transmissions.

Shaker/vent/air grabber cable firewall grommet. Fits 15/16" hole. Has embossed part number 2276552, licensed Chrysler product.

Speedometer cable grommet for 63-76 A, 64-76 B, and 70-4 E. Fits 15/16" hole in firewall, hole in center is large enough to fit over the white plastic fitting on 1968-up speedometer cables. Important Installation Note: Customers have asked how to get this grommet over the end of the plastic ferrule on the later model speedo cables or the nut on the earlier speedo cables. I have included a picture showing the grommet stretched over a 1/2" drive 3/8" socket. I used some WD40 to help get the grommet on the socket. The large end of the socket can be placed over / next to the ferrule or nut and then slid onto the cable.

Shaker/vent/air grabber control cable grommet, fits 15/16" hole in firewall, center hole small to seal around cable.

Speedometer cable to firewall grommet for 62-63 B bodies and 62-70 C bodies. Fits 1.187" hole in firewall. Mopar Part# 1971861 2426712.

Speedometer pinion adapter clamp & bolt, (1966 & later transmissions), holds adapter in tailshaft. Original clamp & bolt have been bead blasted and black oxided.

Speedometer cable clamp & bolt, (1962-65 transmissions), holds cable in tailshaft. Original clamp & bolt have been bead blasted and black oxided.

Speedometer pinion hole caplug, fits all 1966 and later A833 4-speeds, as well as 727/904 Torqueflite automatic transmissions, keeps dirt and small critters out of your transmission when stored!

Speedometer pinion hole caplug, fits all 1962 to 1965 A833 4-speeds, and early 727/904 Torqueflite automatic transmissions, keeps dirt and small critters out of your transmission when stored!

Speedometer pinion hole plug, fits all 1966 and later A833 4-speeds, as well as 727/904 Torqueflite automatic transmissions, eliminates the need for the speedometer adapter when not needed in race cars.

Reconditioned speedometer pinion adapter kit for all 1966 & up transmissions (A833, and 904/727 Torqueflite), this unique housing is for use with 21 to 25 tooth speedometer pinions ONLY! Threads chased, new O-ring & inner seal installed, retaining clamp/bolt included. Reference Chrysler part number 2892994.

New reproduction speedometer pinion adapter for all 1966 & up transmissions (A833, and 904/727 Torqueflite) using 26 to 45 tooth speedometer pinions. New O-ring & inner seal installed.

New reproductin speedometer pinion adapter kit for all 1966 & up transmissions (A833, and 904/727 Torqueflite) using 26 to 45 tooth speedometer pinions. New O-ring & inner seal installed, good used retaining clamp/bolt included.

Speedometer pinion adapter inner seal, seals speedometer pinion shaft to adapter (1966 & later transmissions).

Speedometer pinion adapter inner seal retainer (1966 & later transmissions).

Speedometer pinion adapter seal kit for all 1966 & up transmissions (A833, and 904/727 Torqueflite). Includes 1 each OR3301 o-ring, SS3991 inner seal, and SS3991R seal retainer. (See our SPA66N for new adapter with seal, o-ring and retaining clamp/bolt).

Speedometer pinion adapter seal installation tool, for all 1966 & up transmissions (A833, and 904/727 Torqueflite). Squares and sets the inner seal and retaining clip to the correct depth. Same as Miller specialty tool C-4004.

Speedometer cable seal kit for 1964-65 A833 ball & trunion four speed transmissions, and all 1962-65 cable shift 727 Torqueflite transmissions. Includes o-ring and inner speedometer gear seal.