MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

New reproduction 1971 Plymouth Cuda Barracuda upper and lower horizontal grille trim, pair.

New reproduction four piece 1968 Dodge Charger grille molding set, includes two end "U" moldings and two upper/lower moldings.

New reproduction seven piece 1969 Dodge Charger grille molding set, includes two end "U" moldings, center "I" molding, and four upper/lower moldings.

This hardware kit is correct for servicing two Kelsey Hayes calipers used on 1972 B & E-Body vehicles. Kit includes all four disc brake housing locating pins, inner & outer bushings for both calipers, four pin positioners, & both outer pad retaining springs. Pins have correct 1/2? hex with flanged head and are zinc plated for corrosion resistance. Left & right positioners are correct dimpled style, embossed with ?UP? & arrow marks, & are clear zinc plated as original. Reference Chrysler part numbers 3621 960, 2944 770-1, 3461 894, and 3004 864.

This hardware kit is correct for servicing two Kelsey Hayes calipers used on 1973-74 B and E-Body vehicles. Kit includes all four disc brake housing locating pins, inner and outer bushings for both calipers, and both outer pad retaining springs. Reference P/N 3744 477 pin and bushing kit and 3461 894 springs. Discontinued, one available.

This hardware kit is correct for servicing two Kelsey Hayes calipers used on 1970 B & E-Body vehicles. Kit includes all four disc brake housing locating pins, inner & outer bushings for both calipers, four pin positioners, four outer caliper bushing covers & both outer pad retaining springs. Pins are machined from high tensile steel with correct 3/8? hex head, are chrome plated for wear resistance, & include the correct collapsible spin washer in yellow zinc. Left & right positioners are correct flat style, embossed with ?UP? & arrow marks, & are yellow cadmium plated as original. Reference Chrysler part numbers 2944 719, 2944 722-3, 3461 894, and 3004 864.

This hardware kit is correct for servicing two Kelsey Hayes calipers used on 1971 B & E-Body vehicles. Kit includes all four disc brake housing locating pins, inner & outer bushings for both calipers, four pin positioners, & both outer pad retaining springs. Pins are machined from high tensile steel with correct 3/8? hex head, are chrome plated for wear resistance, & include the correct collapsible spin washer in yellow zinc. Left & right positioners are correct dimpled style, embossed with ?UP? & arrow marks, & are clear zinc plated as original. Reference Chrysler part numbers 2944 719, 3461 770-1, 3461 894, and 3004 864.

Good used slant six 9.5" bell housing dust seal, this is the tin shield that fits on the front of the bell housing and closes the gap between the lower dust cover and bottom edge of the block. Fits all 1964-1978 9.5" slant six bell housings with casting numbers 2463027 2468433 2658957 3743643 and 4202506.

New small block 9.5" bell housing starter seal, this is the tin shield that fits on the front of the bell housing and closes the gap between the lower dust cover and bottom edge of the block. Fits all 1964-1968 9.5" small block bell housings with casting numbers 2465523 and 2806081.

New exact reproduction small block 10.5" bell housing starter seal, this is the tin shield that fits on the front of the bell housing and closes the gap between the lower dust cover and bottom edge of the block. Fits all 10.5" small block bell housings with casting numbers 2843887, 2892482, 3515734, 3743859 and 4202507. A Brewer's Performance, Inc. exclusive reproduction. Short DCB-SB self tapping screws (2) needed for attachment to lower dust cover.

Small block 11" bell housing starter seal, this is the tin shield that fits on the front of the bell housing and closes the gap between the lower dust cover and bottom edge of the block. Fits 11" small block truck bell housings with casting numbers 3497270, 3681131 and 3893728. Good used. Short DCB-SB self tapping screws (2) needed for attachment to lower dust cover.

Countershaft/reverse shaft woodruff keys, pair.

Shifter linkage rod clip & washer package, consists of 6 CL015 clips and 3 each LW330 and LW400 washers. Kit services original equipment factory Hurst shifter linkage on all 4-speed cars.

Shifter linkage clip, sold each, 6 required per car. For best value, see our CL/WA kit.

Clutch linkage clip, attaches clutch pedal rod to clutch pedal/torque shaft, and clutch adjusting rod to torque shaft. 3 per car, sold each. Fits all models. Reference Chrysler part # 2405085

Clutch linkage "anti-squeak" washer, goes on clutch linkage pins on clutch pedal and torque shaft. 3 per car, sold each. Reference Chrysler part # 2405086

New console assembly, complete with glovebox door, lock and woodgrain top plate, fits 1970 E-body 4-speed cars (No ashtray, seat belt storage pocket at rear). New reproduction, slight fitting of top plate required.

Console ash tray and bezel, fits 1971 to 1974 B/E body 4-speed and automatic consoles, also fits 1970 E-body rear interior panels and 1966-70 B-body armrests. New reproduction.

New console body, fits 1967 to 1970 B-body cars. New reproduction.

4-speed console brackets for all 1966-74 A-body cars. A must when adding a console to your conversion. Nice reproductions, set of three.