MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Shifter linkage rod set, fits 1973-74 B/E-body models with original equipment shifter mechanism/operating levers. Includes 1-2 rod, 3-4 rod, reverse rod, 3 adjusting swivels, and clip/washer package. NOTE: For TTI exhaust on 1973-74 E-body, use LRS-E.

Shifter linkage rod set, fits 1970-72 E/1971-2 B-body models with original equipment shifter mechanism & operating levers. Includes 1-2 rod, 3-4 rod, reverse rod, 3 adjusting swivels, and clip/washer package.

Linkage rod and lever set, for Borg Warner T85 3-speed transmission, as used in 1962-64 Max Wedge cars. Includes rods, swivels, operating levers, and clips/washers.

Shifter linkage rod set, fits 1976-up Dodge trucks with A833 overdrive transmission. Good used rods, new swivels, new clip/washer package.

Shifter linkage rod set, fits 1970 B-body models with original equipment shifter mechanism/operating levers. Includes 1-2 rod, 3-4 rod, reverse rod, 3 adjusting swivels, and clip/washer package.

Shifter linkage rod set, fits 1971-74 B-body bench seat models using front shifter location and 6" setback shifter mounting bracket (SMP668) and original equipment shifter mechanism/operating levers. Includes 1-2 rod, 3-4 rod, reverse rod, 3 adjusting swivels, and clip/washer package.

Shifter linkage 1-2 rod/swivel for 1976-up Dodge truck with A833 overdrive transmission. Good used. 10" overall length.

Shifter linkage 3-4 rod/swivel for 1976-up Dodge truck with A833 overdrive transmission. Good used. 13 3/4" overall length.

Shifter linkage reverse rod/swivel for 1976-up Dodge truck with A833 overdrive transmission. Good used. 11 3/4" overall length.

Shifter linkage adjusting swivel, .375" diameter end fits 1-2 and 3-4 factory shifter mechanism arms and reverse operating lever. Sold each, 3 required per vehicle. See our LS317 swivel for 1970 model cars with reverse/column interlock linkage.

Shifter linkage adjusting swivel, .375" diameter double-ended, for reverse rod on 1970 model cars with reverse/column interlock linkage. One per car.

Stainless steel linkage swivel adapter bushing, allows use of aftermarket Hurst shifter mechanism with OEM 1-2 and 3-4 linkage rods and side cover operating levers. .378" inside diameter and .500" outside diameter.

Stainless steel reverse lever adapter bushing, allows use of aftermarket Hurst shifter mechanism with OEM reverse linkage rod and side cover operating lever. .330" inside diameter and .500" outside diameter.

Shifter linkage washer for the rod end of OEM linkage rods. .330 inside diameter, sold each, uses 3 per car. For best value, see our CL/WA package.

Shifter linkage washer for the swivel end of OEM linkage. .400 inside diameter, sold each, uses 3 per car. For best value, see our CL/WA package.

Weight package for McLeod race pressure plates. Includes various aluminum and steel fasteners/weights to vary clutch centrifugal apply.

McLeod 10.5" 23 spline organic clutch disc, can be used with any standard pressure plate.

McLeod 10.9" 23 spline organic clutch disc, can only be used with scalloped 10.95 pressure plate, or standard 11" pressure plate.

McLeod 10.5" 18 spline organic clutch disc, can be used with any standard pressure plate.

McLeod 10.9" 18 spline organic clutch disc, can be used with scalloped 10.9" pressure plate, or standard 11" pressure plate.