MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Transmission mount 1965-68 C-body automatic, polyurethane. 4" center to center spacing on transmission mount to tail housing bracket.

Transmission mount 1965-68 C-body 4-speed, polyurethane. 2 3/4" center to center spacing on transmission mount to tail housing bracket.

Reconditioned original transmission mount to tailshaft bolts, 7/16" coarse thread, pair.

Reconditioned original transmission mount to cross member bolt (spool type mount) 1/2" coarse thread, used on 1970-4 E, 1971-4 B and 1973-6 A bodies.

Reproduction transmission mount/bolt support plate, used on 1970-74 E-body and 1971-4 B-body cars with spool type mount, 1" wide by 1.80" long. Pair

Original transmission mount/bolt support plate, used on 1970-74 E-body and 1971-4 B-body cars with spool type mount, 1" wide by 1.80" long. Black oxide, Pair.

Excellent reproduction of the long extinct 3614 169 choke assembly for 1972 340 Carter Thermoquad equipped cars. Has the correct part number "69" stamped on the choke housing. Yellow zinc dichromate and zinc finished parts as original. Includes carburetor attaching clip and two correct mounting screws.

Excellent reproduction of the long extinct 3512 875 choke assembly for 1971 340 Carter Thermoquad equipped cars. Has the correct part number "75" stamped on the choke housing. Yellow zinc dichromate and zinc finished parts as original. Includes carburetor attaching clip and two correct mounting screws.

Specifically formulated for use as an assembly lubricant for all automatic and manual transmissions. It lubricates and helps hold in place needle bearings, thrust washers, sealing rings, "O" rings, hydraulic seals and gaskets during assembly. Remains smooth and stable at working temperatures, and is soluble in all transmission fluids and gear oil. 1 pound plastic tub.

Tail shaft seal NP435 and NP445 truck transmissions 1975-1993.

Torque shaft, fits all 1967-1976 A-body slant six applications. 8" tube length, good used. Reference Chrysler part number 2950251

Torque shaft, fits all 1967-1976 A-body small block V8 applications with 10.5" bellhousing. 7" tube length. Reference Chrysler part number 2950238

NOS Mopar #2400300 transmission tail shaft seal, correct for 727 torqueflite 1965 1966 1967 1968 1969 1970 1971 and 1966 to 1971 A833 4-speed transmissions (both 23 and 18 spline with 30 spline output shafts). Seal has the correct part number and rolled lip where seal bottoms in the extension housing, as did the production line seal. If you are doing a 100 point restoration on your 426 Hemi Cuda or 440 6-pack car, you need this seal.

Torque shaft, fits 1967-1969 A-body big block applications with stock 10.5" bellhousing (will also work in 1970-1976 A-body big block cars with 10.5" bellhousings). Will NOT work with TTI headers. See TS252KIT for complete torque shaft kit.

Complete torque shaft kit for 1967-69 A-body big block cars with stock 10.5" bellhousings (will also work in any 1970-76 A body big block conversion). Includes (1) TS252 torque shaft (1) BSS481 spacer (2) HC916 bolts (1) BSB271 bellhousing ballstud/bracket (1) CSK parts kit (1) BS766F frame ballstud (1) BSW ballstud washer, and (1) BSN nut. Will NOT work with TTI headers.

Torque shaft, fits all 1962-1965 B-body V8 applications with 10.5" bellhousing.

Torque shaft, fits 1965-1968 C-body V8 applications.

Torque shaft, 1972-79 truck applications, reconditioned, as available.

Torque shaft fits 1963-1966 A-body applications when converting to 1968 & later 10.5" bellhousings. Requires use of our BSB636 bellhousing ballstud bracket, AK636 adjusting rod kit, FP484 fork pivot, and CF702 clutch fork..

Replacement booted tailshaft seal for all 30 spline output 4-speed transmissions, also fits all 727 automatic transmissions. Replaces Mopar #2400300.