MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Premium gasket & seal kit for all 1966-1972 18 spline transmissions. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, 307 & 308 bearing retainer, reverse detent housing & backup switch gaskets, front pinion & rear tail shaft seals, speedometer adapter housing inner seal/outer o-ring, and gearshift lever shaft o-rings.

Premium gasket & seal kit for all 1966-1975 23 spline transmissions with 30 spline output shaft. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, 307 & 308 bearing retainer, reverse detent housing & backup switch gaskets, front pinion & rear tail shaft seals, speedometer adapter housing inner seal/outer o-ring, and gearshift lever shaft o-rings.

Premium gasket & seal kit for all 1966-67 A-body 23 spline transmissions with 26 spline output shaft/C96706 tail shaft housing. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, 307 bearing retainer, reverse detent housing & backup switch gaskets, front pinion & rear 2.25� outside diameter tail shaft seals, speedometer adapter housing inner seal/outer o-ring, and gearshift lever shaft o-rings.

Premium gasket & seal kit for all A-body 23 spline transmissions with 26 spline output shaft and 2.375� diameter tail shaft seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, 307 bearing retainer, reverse detent housing & backup switch gaskets, front pinion & rear 2.375� outside diameter tail shaft seals, speedometer adapter housing inner seal/outer o-ring, and gearshift lever shaft o-rings.

Gasket & seal kit for all A/F 23 spline aluminum case/extension housing overdrive A833 transmissions with 26 spline output. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, and 308 bearing retainer gaskets, front pinion & rear tail shaft seal, backup light switch gasket, gearshift lever shaft o-rings, speedometer adapter housing inner seal/outer o-ring, and countershaft plug.

Gasket & seal kit for all A/F 23 spline aluminum case/extension housing overdrive A833 transmissions with 30 spline output. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, and 308 bearing retainer gaskets, front pinion & rear tail shaft seal, backup light switch gasket, gearshift lever shaft o-rings, speedometer adapter housing inner seal/outer o-ring, and countershaft plug.

Gasket & seal kit for all A/F 23 spline aluminum case/extension housing/cast iron side cover overdrive A833 transmissions with 26 spline output. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, and 308 bearing retainer gaskets, front pinion & rear tail shaft seal, backup light switch gasket, gearshift lever shaft o-rings, speedometer adapter housing inner seal/outer o-ring, and countershaft plug.

Gasket & seal kit for all 1981-87 23 spline aluminum case/cast iron extension housing overdrive A833 truck transmissions. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, and 308 bearing retainer gaskets, front pinion & rear tail shaft seal, backup light switch gasket, gearshift lever shaft o-rings, speedometer adapter housing inner seal/outer o-ring, and countershaft plug.

Gasket & seal kit for all 1977-80 23 spline cast iron case/cast iron extension housing overdrive A833 A/F body and truck transmissions. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! Kit includes extension housing, side cover, and 308 bearing retainer gaskets, front pinion & rear tail shaft seal, reverse detent and backup light switch gaskets, gearshift lever shaft o-rings, speedometer adapter housing inner seal/outer o-ring, and countershaft plug.

Gear Vendor overdrive kit, fits most 1966 and later A833 4-Speed transmissions with 16 1/2" extension housings, will fit most B & E body cars, also used on A-body applications .78 overdrive ratio. Rear axle ratio/rear tire diameter needed to insure correct speedometer reading. Please call for brochure or more information.

Bearing and seal rebuild kit for all 1966-69 B-body and 1967-1974 A-body transmissions with 23 spline input/30 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainers C94796/C97619 and extension/tail shaft housings 13212, 96707, 97477, 99126, and 99127. Please verify your transmission before ordering. Synchronizer stop rings sold separately.

Bearing and seal rebuild kit for all 1966-7 A-body transmissions with 23 spline input/26 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C94796 and extension/tail shaft housing 96706. Please verify your transmission before ordering. Synchronizer stop rings sold separately.

Bearing and seal rebuild kit for all 1966-67 B-body transmissions with 18 spline input/30 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer 2538197 and extension/tail shaft housing 96707. Please verify your transmission before ordering. Synchronizer stop rings sold separately.

Bearing and seal rebuild kit for 18 spline input 4-SP with 30 spline output. This is a "hybrid" rebuild kit. Includes 1 each 307/308 main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket. Please verify your transmission before ordering. Synchronizer stop rings sold separately.

Bearing and seal rebuild kit for all 1968-1972 B/E-body transmissions with 18 spline input/30 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainers 2801892/C97621 and extension/tail shaft housings 97623, 99128, 99539, and 99621. Please verify your transmission before ordering. Synchronizer stop rings sold separately.

Speedometer pinion adapter inner seal, seals speedometer pinion shaft to adapter (1966 & later transmissions).

Speedometer pinion adapter inner seal retainer (1966 & later transmissions).

Speedometer pinion adapter seal kit for all 1966 & up transmissions (A833, and 904/727 Torqueflite). Includes 1 each OR3301 o-ring, SS3991 inner seal, and SS3991R seal retainer. (See our SPA66N for new adapter with seal, o-ring and retaining clamp/bolt).

Speedometer pinion adapter seal installation tool, for all 1966 & up transmissions (A833, and 904/727 Torqueflite). Squares and sets the inner seal and retaining clip to the correct depth. Same as Miller specialty tool C-4004.

Speedometer cable seal kit for 1964-65 A833 ball & trunion four speed transmissions, and all 1962-65 cable shift 727 Torqueflite transmissions. Includes o-ring and inner speedometer gear seal.