MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Bearing and seal rebuild kit for all 1970-up E/1971-4 B-body small block transmissions (also some late 1969 B-body big block transmissions) with 23 spline input/30 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainers C94796/C97619 and extension/tail shaft housings C99539/C99621. Please verify your transmission before ordering. Synchronizer stop rings sold separately.

Bearing and seal rebuild kit for all 1970-up B/E-body big block transmissions with 23 spline input/30 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C99369 and extension/tail shaft housings C99539 and C99621. Please verify your transmission before ordering. Synchronizer stop rings sold separately.

Bearing and seal rebuild kit for A/F-body overdrive transmissions (with cast iron main case/extension) with 23 spline input/30 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C13157 and extension/tail shaft housing C13212. Please verify your transmission before ordering. Synchronizer stop rings sold separately.

Bearing and seal rebuild kit for A-body overdrive transmissions (with aluminum main case/extension, cast iron side cover) with 23 spline input/26 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C13157 and extension/tail shaft housings C133 64A or C133 86. Please verify your transmission before ordering. Synchronizer stop rings sold separately.

Bearing and seal rebuild kit for A-body overdrive transmissions (with aluminum main case/extension, aluminum side cover) with 23 spline input/26 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C13157 and extension/tail shaft housings C133 64A or C133 86. Please verify your transmission before ordering. Synchronizer stop rings sold seperately.

Bearing and seal rebuild kit for A-body overdrive transmissions (with aluminum main case/extension, cast iron side cover) with 23 spline input/26 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets (except side cover gasket) supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C97728 and extension/tail shaft housings C133 64A or C133 86. Please verify your transmission before ordering. Synchronizer stop rings sold seperately.

Bearing and seal rebuild kit for A-body overdrive transmissions (with aluminum main case/extension, aluminum side cover) with 23 spline input/30 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C13157 and extension/tail shaft housings C13212-2 or C13305. Please verify your transmission before ordering. Synchronizer stop rings sold separately.

Bearing and seal rebuild kit for A-body overdrive transmissions (with aluminum main case/extension, cast iron side cover) with 23 spline input/30 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C13157 and extension/tail shaft housings C13212-2 or C13305. Please verify your transmission before ordering. Synchronizer stop rings sold separately.

Bearing and seal rebuild kit for late 1978 to 1987 truck overdrive transmissions (with aluminum main case) with 23 spline input/30 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket! This kit works with bearing retainer C13157 and extension/tail shaft housings 99539. Please verify your transmission before ordering. Synchronizer stop rings sold separately.

Bearing and seal rebuild kit for 1976 to 1978 truck overdrive transmissions (with cast iron main case) with 23 spline input/30 spline output. Includes main bearings, tail shaft bushing, countershaft rollers/spacers/thrust washers, input rollers, snap rings and all appropriate gaskets & seals, including speedometer adapter o-ring and seal. Flat paper gaskets supplied in this kit are manufactured exclusively for Brewer’s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. This material does not require the use of additional sealants. Continuous temperature rated to 400 degrees Fahrenheit. Additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket!This kit works with bearing retainer C13157 and extension/tail shaft housings 99539. Please verify your transmission before ordering. Synchronizer stop rings sold separately.