View Cart

MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Home » BELLHOUSINGS » All Products

 Checkout
BHSS10 BELLHOUSING STARTER SEAL BIG BLOCK WITH 10.5" BELLHOUSING
Product ID: BHSS10

Details 

Bellhousing to starter seal, fits between starter and bellhousing to seal out dirt and water, also shims starter for proper starter drive to ring gear engagement. Used on 10.5" big block bellhousings with casting numbers 2402219, 2406042, 2406293, 2463019, 2463236, 2468370, 2468372, 2536106, 2892513, BH513R and BH513R-S Brewer's Performance reproductions, and all big block 727 automatics.
Price: $12.95
Add to cart

BHSS11 BELLHOUSING STARTER SEAL BIG BLOCK WITH 11" BELLHOUSING
Product ID: BHSS11

Details 

Bellhousing to starter seal, fits between starter and bellhousing to seal out dirt and water, also shims starter for proper starter drive to ring gear engagement. Used on big block 11" bellhousings with casting numbers 2843234, 2892262, 2892626 and 11" truck bellhousings with casting numbers 2899104, 3491637, 3497272 and 4039670.
Price: $12.95
Add to cart

BP-BHBB BELLHOUSING TO ENGINE BLOCK BOLT PACKAGE BIG BLOCK
Product ID: BP-BHBB

Details 

Bellhousing to engine block bolt and washer package, includes 6 washers and bolts. Fits all big block 4-speed applications.
Price: $24.95
Add to cart

BP-BHSB BELLHOUSING TO ENGINE BLOCK BOLT PACKAGE SMALL BLOCK
Product ID: BP-BHSB

Details 

Bellhousing to engine block bolt and washer package, includes 7 bolts/5 washers. Fits all small block 4-speed applications.
Price: $22.95
Add to cart

BP-LAKE BOLT PACKAGE LAKEWOOD BELLHOUSING
Product ID: BP-LAKE

Details 

Bolt package for all older Lakewood bell housings, using 3/8" bolts for the block saver to bell housing attachment. For all small and big block applications, includes (5) bell housing to block bolts/washers, (14) block saver to bell housing bolts/washers/nuts, and (2) starter mounting bolts/washers/nuts. For newer Lakewood bell housings (using 1/2" bolts for the block saver to bell housing) select BP-LAKE-LG.
SELECT BP-LAKE, WITH 3/8" BLOCK PLATE BOLTS
BP-LAKE-LG, WITH 1/2" BLOCK PLATE BOLTS (+$4.00)
Price: $22.95
Add to cart

BP-ST STARTER TO BELLHOUSING HARDWARE PACKAGE
Product ID: BP-ST

Details 

Starter to bellhousing hardware package, includes correct stud, lockwasher, nut and captured washer bolt. Fits all 1962 and later applications with gear reduction starter. Will NOT work for 1966 to 1969 Hemi 4-speed application with direct drive starter.
Price: $12.95
Add to cart

BP-TB TRANSMISSION TO BELLHOUSING BOLT PACKAGE
Product ID: BP-TB

Details 

Transmission to bellhousing bolt and washer package, includes 4 each correct external tooth washers and bolts. Fits all 4-speed applications.
Price: $6.95
Add to cart

BRA0605 BEARING RETAINER ADAPTER RING 4.354 RETAINER TO 4.807 BELLHOUSING
Product ID: BRA0605

Details 

Bearing retainer adapter ring, adapts 4.354" diameter transmission bearing retainer to fit 4.807" large hole bellhousings.
Price: $29.95
Add to cart

BSB507 BELLHOUSING BALLSTUD/BRACKET 1981-87 TRUCK OVERDRIVE SMALL BLOCK
Product ID: BSB507

Details 

Bellhousing ballstud/bracket for 1981-87 Dodge truck small block applications with A833 overdrive, fits 10.5" overdrive bellhousing with casting number 4202507. Good used.
Price: $0.00

BSB634 BELLHOUSING BALLSTUD/BRACKET 1974-80 TRUCK OVERDRIVE SLANT SIX
Product ID: BSB634

Details 

Bellhousing ballstud/bracket for 1974-80 Dodge truck slant six applications with A833 overdrive, fits 10" overdrive bellhousings with casting numbers 3743843 and 4202506. 5 1/2" overall length, good used. OE part number 3491634
Price: $39.95
Add to cart

BSB688 BELLHOUSING BALLSTUD/BRACKET 1981-87 TRUCK OVERDRIVE SLANT SIX
Product ID: BSB688

Details 

Bellhousing ballstud/bracket for 1981-87 Dodge truck slant six applications with A833 overdrive, fits 10" overdrive bellhousings with casting numbers 3743843 and 4202506. 5" overall length, good used. OE part number 4120688.
Price: $39.95
Add to cart

BSB859 BELLHOUSING BALLSTUD/BRACKET 1976-80 TRUCK OVERDRIVE SMALL BLOCK
Product ID: BSB859

Details 

Bellhousing ballstud/bracket for 1976-80 Dodge truck small block applications with A833 overdrive, fits 10.5" overdrive bellhousing with casting number 3743859. Good used.
Price: $0.00

CF-BALL CLUTCH FORK 1981-87 SMALL BLOCK, MOST DODGE TRUCKS/BALL PIVOT STYLE
Product ID: CF-BALL

Details 

Reconditioned overdrive small block clutch fork, ball pivot style (Mopar part number 4210697), fits 1981-87 Slant 6 and V8 overdrive bell housings with casting numbers 4202506, 4202507 and 4202508, 13 1/8" overall length.
SELECT NO FPB FORK PIVOT BALLSTUD
ADD NEW FPB FORK PIVOT BALLSTUD (+$19.95)
SELECT ADD FB300 FORK BOOT (+$29.95)
NO FB300 FORK BOOT
Price: $69.95
Add to cart

CHS173 BELLHOUSING DUST SEAL 9.5" SLANT SIX BELLHOUSINGS
Product ID: CHS173

Details 

Good used slant six 9.5" bell housing dust seal, this is the tin shield that fits on the front of the bell housing and closes the gap between the lower dust cover and bottom edge of the block. Fits all 1964-1978 9.5" slant six bell housings with casting numbers 2463027 2468433 2658957 3743643 and 4202506.
Price: $0.00

CHS549 BELLHOUSING STARTER SEAL 9.5" SMALL BLOCK BELLHOUSINGS
Product ID: CHS549

Details 

New small block 9.5" bell housing starter seal, this is the tin shield that fits on the front of the bell housing and closes the gap between the lower dust cover and bottom edge of the block. Fits all 1964-1968 9.5" small block bell housings with casting numbers 2465523 and 2806081.
SELECT ADD (2) DCB-SB SELF TAPPING SCREWS (1) DCB MOUNTING SCREW (+$2.85)
NO DCB-SB SELF TAPPING SCREWS/MOUNTING SCREW
Price: $49.95
Add to cart

CHS911 BELLHOUSING STARTER SEAL 10.5" SMALL BLOCK BELLHOUSINGS
Product ID: CHS911

Details 

New exact reproduction small block 10.5" bell housing starter seal, this is the tin shield that fits on the front of the bell housing and closes the gap between the lower dust cover and bottom edge of the block. Fits all 10.5" small block bell housings with casting numbers 2843887, 2892482, 3515734, 3743859 and 4202507. A Brewer's Performance, Inc. exclusive reproduction. Short DCB-SB self tapping screws (2) needed for attachment to lower dust cover.
SELECT ADD (2) DCB-SB SELF TAPPING SCREWS (1) DCB MOUNTING SCREW (+$2.85)
NO DCB-SB SELF TAPPING SCREWS/MOUNTING SCREW
Price: $39.95
Add to cart

CHS912U BELLHOUSING STARTER SEAL 11" SMALL BLOCK TRUCK BELLHOUSINGS
Product ID: CHS912U

Details 

Small block 11" bell housing starter seal, this is the tin shield that fits on the front of the bell housing and closes the gap between the lower dust cover and bottom edge of the block. Fits 11" small block truck bell housings with casting numbers 3497270, 3681131 and 3893728. Good used. Short DCB-SB self tapping screws (2) needed for attachment to lower dust cover.
SELECT ADD (2) DCB-SB SELF TAPPING SCREWS (1) DCB MOUNTING SCREW (+$2.85)
NO DCB-SB SELF TAPPING SCREWS/MOUNTING SCREW
Price: $79.95
Add to cart

DC-6 DUST COVER SIX CYLINDER TRUCK 9.5" STEEL NICE USED
Product ID: DC-6

Details 

Steel dust cover for slant six 9.5" bellhousings, nice used, bead blasted and primed. Fits cast iron bellhousings with casting numbers 2463027 and 2468433, aluminum bellhousings 3743643 and 4202506.
SELECT ADD (5) DCB DUST COVER BOLTS (+$4.75)
NO DCB DUST COVER BOLTS
Price: $49.95
Add to cart

DC035 DUST COVER BIG BLOCK 10.5" STEEL 1968-74-UP RECONDITIONED ORIGINAL
Product ID: DC035

Details 

Dust cover for 10.5" big block bellhousings, reconditioned original, round drain hole, correct for 1968-1974, will also fit bellhousings with casting numbers 2402219, 2406293, 2463019, 2468370, 2468372, 2892513. May have light pitting. Center to center measurement on rear outboard holes 10 3/8".
SELECT ADD (5) DCB DUST COVER BOLTS (+$4.75)
NO DCB DUST COVER BOLTS
Price: $149.95
Add to cart

DC10 DUST COVER BIG BLOCK 10.5" STEEL REPRODUCTION
Product ID: DC10

Details 

Dust cover for 10.5" big block bellhousings, exact steel reproduction for 1968-74, fits bellhousings with casting numbers 2402219, 2406293, 2463019, 2468370, 2468372, 2892513, and BH513R and BH513R-S Brewer's Performance reproductions. Center to center measurement on rear outboard holes 10 3/8". EDP coated.
SELECT ADD (5) DCB DUST COVER BOLTS (+$4.75)
NO DCB DUST COVER BOLTS
Price: $99.95
Add to cart

« | 1 | 2 | 3 | 4 | 5 | »

Brewer's Performance

10510 State Route 571
Laura, OH 45337

PH: (937) 947-4416 or (937) 698-4259
FAX: (937) 947-4419
Monday-Friday 9AM-5PM