MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Universal joint package, heavy duty 7260 2 1/8" inside yoke dimension, with grease zert. 3" overall width with 1.078" cap diameter, uses internal "C" retaining clips. Will NOT work with our TY8330 slip yoke, see UJ315

Universal joint package, 7260 2 1/8" inside yoke dimension, with grease zert. 3" overall width with 1.078" cap diameter, uses internal "C" retaining clips. Use with original equipment factory transmission slip yoke.

Combination universal joint, 7260 2 1/8" on one side, 7290 2 5/8" on the other, allows you to use large driveshaft with small pinion yoke on the rearend, or use small driveshaft with large pinion yoke rearends. Not recommended for high performance applications.

Universal joint package, 7290 Spicer 2 5/8" high nickel/no grease zert for high performance and racing applications.

Universal joint boot and clamp repair package for 1957 to 1965 318-361-383-426W V8 models with ball & trunion (Detroit) style driveshaft, replaces Mopar # 2275514 Includes boot, clamps, and instructions. Does NOT fit small joint used on Slant 6 and 273 applications.

Universal joint transmission/companion flange for most 1963 to 1965 A-body A833 4-speed models with 3.625" diameter, 3.750" long ball & trunion (Detroit) style driveshaft, OE #2400977. Good used part with minimal seal surface wear.

Universal joint transmission/companion flange for most 1964-65 A833 4-speeds B & C-body models and 1962-64 Borg Warner T85 3-speeds, with 4" diameter, 3.875" long ball & trunion (Detroit) style driveshaft, OE #2400978. Good used part with minimal seal surface wear.

Pinion yoke strap/bolt kit, fits small Chrysler 7260 universal joint.

Pinion yoke strap/bolt kit, fits large Chrysler 7290 universal joint.

Pinion yoke U-bolt/nut kit, fits Spicer 1330 universal joint. Can also be used with 7260/7290 stock pinion yokes if tapped holes drilled out.

Pinion yoke U-bolt/nut kit, fits Spicer 1350 universal joint.

Vent baffle for all 1966 and later A833 4-speed transmissions. Good used original.

Vapor seperator, mounts on fuel pump, fits 1968-71 B/E body 440 and 426 Hemi applications.

New tailshaft vent assembly, for all 1966-up A833 4-speed transmissions.

VHT very high temperature black wrinkle plus paint, durable texture coating, rated to 350 degree. 11 oz. can. Ideal for stock air cleaners.

VHT very high temperature flame proof header/exhaust "cast iron" manifold paint, silica ceramic coating rated to 1300-2000 degree. 11 oz. can.

Replacement voltage wire plug, for use with solid state voltage regulator. Plug with 70" wires.

Wheel bearing package, includes 2)2525415 Timken wheel bearings with retainer collars, 2)2404216 outer seals, and 1 each 2404115/2404475 NOS axle adjuster/axle retainer plates. Kit services one vehicle, fits all models 1965 to 1978 with 8 3/4 or 1966-72 Dana 60 rearends. LIMITED SUPPLY!

Windshield washer bottle reservoir, for 1967-70 A-body models (electric pump/variable speed wipers), pump NOT included.

Windshield washer bottle reservoir, for 1967 B-body models with electric pump. Pump NOT included.