MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Clutch adjuster rod only, fits 1970-1 E-body and 1971-4 B-body big block cars using original torque shaft and 10.5" bellhousing. See AK450 for complete adjusting rod kit. Adjusting rod is 4 7/8" overall length.

Clutch adjuster rod only, fits 1964-70 B-body big block and 1970-4 E-body/1971-4 B-body small block. See AK449 for complete adjusting rod kit. Adjusting rod is 4 7/8" overall length.

ARP #100-9908 Ultra-Torque fastener assembly lube .5 oz. packet, use to precisely duplicate all ARP fastener preload specifications.

Lakewood axle shims 2 degree, pair. Mount between axle housing and leaf spring to correct pinion angle.

Lakewood axle shims 4 degree, pair. Mount between axle housing and leaf spring to correct pinion angle.

Inner axle seal, fits all 1965 to 1978 8 3/4 rear axle assemblies, 2.69" outside diameter, 1.50" inside diameter, two required per vehicle, sold each.

Outer wheel bearing seal (installs in retainer/adjuster plates), fits all 1965 to 1978 8 3/4 and 1966 to 1972 Dana 60 9 3/4 rear axle assemblies, two required per vehicle, sold each.

Inner axle seal, 2.502" outside diameter, 1.5" inside diameter, fits all 1966 to 1972 Dana 60 9 3/4 rear axle assemblies, two required per vehicle, sold each.

1970 383/440 and 1971 440 AVS 4-Barrel Choke Assembly, awesome reproduction of the long extinct 2951 653 choke assembly for 1970-71 383/440 and 1971 440 Carter AVS equipped cars. Has the correct part number "53" stamped on the choke housing. Yellow zinc dichromate and zinc finished parts as original. Includes carburetor attaching clip and two correct mounting screws.

1968-1969 383/440 and 1968-1970 340 AVS 4-Barrel Choke Assembly. Awesome reproduction of the long extinct 2863 845 choke assembly for 1968-69 383/440 and 1968-70 340 Carter AVS equipped cars. Has the correct part number "45" stamped on the choke housing. "Lean" and "Rich" marks for adjustment. Yellow chromate and zinc finished parts as original. Includes carburetor attaching clip and correct mounting screw.

Clutch adjusting rod washer, fits all models.

Tailshaft roller bearing for all 1964-5 A833 4-speed transmissions with companion flange/ball & trunion style driveshafts. Also fits 1962-64 727 Torquefilte automatics, and some 1965-91 NP435 truck transmissions. Replaces original Mopar part number 1672194. Correct 1.23" ID, 2.44" OD, and .628" thick.

Transmission tailshaft/mainshaft bearing #207, 2.835" outside diameter and 1.378" inside diameter, used in A-body tailshaft housing with casting number C97706.

Transmission input & tailshaft/mainshaft bearing #307, 3.150" outside diameter 1.378" inside diameter, .825" thick, used in most 1964-1975 4-speeds. Used in tailshaft housings with casting numbers 13305 13212 13386 C95638 C95658 C95919 C96707 C97477 C99126 C99127. Sold each.

Front bearing oil slinger/spacer. Goes between front bearing/input shaft on 1964 and most 1965 A/B A833 transmissions. Only used if originally on your input.

Transmission input & tailshaft/mainshaft bearing #308SG8, 3.543" outside diameter 1.378" inside diameter, .825" thick, used in 1968-1972 18 splines, 1970-74 big block 23 splines, tailshaft housings with casting numbers C97623 C99128 C99539 and C99621. Sold each.

Bendix brake booster check valve, 1970-71 426 Hemi , includes rubber grommet and correct corbin clamp.

Reproduction motor mount engine brackets, fits all 1962 to 1965 B-body cars with "B" and "RB" engine. Powder coated brackets with attaching hardware. Pair

Motor mount engine brackets and insulator kit, fits all 1962 to 1965 B-body cars with "B" "RB" engine. Includes engine to bracket hardware. Pair

Original big block engine brackets, fit all B-body applications from 1966 to 1972 and all E-body 1970-1974. Powder coated satin black, pair.