MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Billet steel bearing retainer for 1968-1972 18 spline transmissions with 308 front bearing, 4.805" outside diameter, 4.16" bolt circle, replaces cast #C97621/2801892 original retainers. Gasket and seal included.

New cast iron bearing retainer for 1968-72 18 spline transmissions with 308 front bearing, 4.805" outside diameter, 4.16" bolt circle, replaces cast #C97621/2801892 original retainers, and Mopar Performance P4529697. Gasket and seal included.

Billet steel bearing retainer 3.70" bolt circle, adapts any 23 spline transmissions with 307 front bearing to 5.125" outside diameter, to use with overdrive bell housings with casting numbers 3743643 3743859 4202506 4202507, replaces cast # C97728 original retainers. Gasket and seal included.

NOS bearing retainer for 23 spline 4-speed overdrives, cast C97728 5.125" diameter, 3.70" bolt circle, 307 bearing. Retainer only. OE part number 2960122.

Reconditioned bearing retainer for 23 spline 4-speed overdrives, cast C97728 5.125" diameter, 3.70" bolt circle, 307 bearing. Includes gasket & pinion seal. Also available in billet steel, see part #BR-728B.

Reconditioned bearing retainer for 23 spline 3-speed, cast number C94781, 4.354" outside diameter, 2.840" diameter bearing.

Billet steel bearing retainer for 1964-7 B-body, 1964-1975 A-body, and 1970-up E-body small block 23 spline transmissions with 307 front bearing, 4.354" outside diameter, 3.70" bolt circle, replaces cast #C94796 original retainer. Gasket and seal included.

New cast iron bearing retainer for 1964-7 B-body, 1964-1975 A-body, and 1970-up E-body small block 23 spline transmissions with 307 front bearing, 4.354" outside diameter, 3.70" bolt circle, replaces original cast C94796 and Mopar Performance P4529694. Gasket and seal included.

Billet steel bearing retainer for the 1981-87 GM version 10 spline MY6 NP440 overdrive transmissions, replaces original cast #C15397 retainers. Gasket and seal included.

NOS bearing retainer, Mopar part number 2400438, fits 1962-64 T85 Max Wedge 3-speed transmissions, and 1963 (and some very early 1964) T10 Borg Warner 4-speed transmission. Call or email for price and availability.

New cast iron bearing retainer for 23 spline NP435 and NP445 truck transmissions 1975-1993, replaces cast #C97552. 5.125" outside diameter (Bearing race/gasket/seal NOT included)

Bearing retainer adapter ring, adapts 4.354" diameter transmission bearing retainer to fit 4.807" large hole bellhousings.

Replacement weld-in torque shaft ballstud for early 1962-65 B-body and most 1963-76 A-body V8 bellhousing ballstud brackets.

Replacement weld-in torque shaft ballstud for early 1962-65 B-body and most 1963-76 A-body slant six bellhousing ballstud brackets. Longer shank than standard V8 ballstuds.

Replacement weld-in frame bracket ballstud for early 1962-65 B-body and 1963-66 A-body frame ballstud brackets (Our FB718, FB718-O, and FB944).

Torque shaft bellhousing ballstud, screws directly into the bellhousing on 1966-1974 B-body big block, and 1970-4 E-body/1971-4 B-body small block cars. Shoulder is 7/8" diameter (compared to 1" diameter for frame side ball) allowing it to be pushed inside torque shaft tube during assembly. 1 per car.

Torque shaft frame end ballstud, used on all 1966-1974 B/E body and all 1967-1976 A-body cars. Shoulder is 1" diameter (compared to 7/8" diameter for bellhousing side ball). 1 per car, add nut and washer for $4.90

Injection molded plastic bucket seat backs (pair), fit 1970 to mid 1971 A/B/E body cars. Excellent reproduction. Black only.

Bellhousing ballstud/bracket for 1967-69 A-body big block 383 cars, or any 1967-76 A-body big block conversions. Works on 10.5" bellhousings with casting numbers 2468370, 2468372 and 2892513, can also be used on Lakewood bellhousings, but modification may be required. Stock bellhousings require spacer BSS481, or see BSB271K for complete kit.

Bellhousing ballstud/bracket/spacer kit for 1967-69 A-body big block 383 cars, or any 1967-76 A-body big block conversions. Kit includes (1) BSB271 ballstud/bracket (1) BSS481 spacer and (2) HC916 bolts. Works on 10.5" bellhousings with casting numbers 2468370, 2468372 and 2892513, and BH513R and BH513R-S Brewer's Performance reproductions. Can also be used on Lakewood bellhousings, but modification may be required. See our TS252KIT for complete torque shaft kit.