MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

New cast replacement 11" 143 tooth 8-bolt crank flange neutral balance flywheel for 2002-2010 5.7/6.1 Hemi motors. Uses our BP398 flywheel bolt package.

New flywheel 11" 143 tooth ring gear, has both 10.5" and 11 Borg & Beck pressure plate patterns, neutral balance, precision ground, ready to install. Can be modified for 360 or 383/400/440 cast crank application, $30 additional.

Reconditioned flywheel, original 11" 143 tooth ring gear, for externally balanced 360 Dodge truck applications, resurfaced, ring gears inspected, ready to install. As available.

Reconditioned flywheel, original 9.5" 122 tooth ring gear, 1964-68 273 V8, neutral balance, resurfaced, ring gears inspected, ready to install. As available.

Reconditioned original factory flywheel, 8-bolt 10.5" 130 tooth ring gear, for 1970-71 426 Hemi motors, resurfaced, ring gears inspected, ready to install.

Reconditioned aftermarket steel flywheel, 8-bolt 10.5" 130 tooth ring gear, resurfaced, ring gears inspected, ready to install.

10.5" 130 tooth 8-bolt crank flange neutral balance flywheel for 2002 & Newer 5.7/6.1/6.4 Gen 3 Hemi motors, can be used with small block V8 10.5" bellhousings with casting numbers 2843887 2892482 3515734 and 3743859. SFI approved, McLeod. Uses our BP398 flywheel bolt package.

Reconditioned flywheel, original 9.5" 122 tooth ring gear, 1968 and later slant six (with 2.16" crankshaft flange register), neutral balance, resurfaced, ring gears inspected, ready to install.

New V8 flywheel 10.5" 130 tooth ring gear, for 318 340 383 413 426W and 440 neutral balance applications, precision ground, ready to install.

Reconditioned flywheel, original 10.5" 130 tooth ring gear, neutral balance, resurfaced, ring gears inspected, ready to install.

New V8 flywheel 10.5" 130 tooth ring gear, for 383 400 and 440 cast crank/external balance applications, precision ground, ready to install.

Reconditioned original flywheel, 8-bolt 11" 172 tooth ring gear (ring gear installed from clutch surface side), for 1966 426 Hemi motors (using original direct drive starter), resurfaced, ring gears inspected, ready to install. As available.

New V8 flywheel 10.5" 130 tooth ring gear, for 340 cast crank/external balance applications, precision ground, ready to install.

New cast replacement flywheel 10.5" 130 tooth ring gear, external balanced for 1970-72 440 magnum and 6-pack motors with heavy rods.

New V8 flywheel 10.5" 130 tooth ring gear, for 1971-92 360 (non-magnum) cast crank/external balance applications, precision ground, ready to install.

Reconditioned flywheel, original 9.5" 122 tooth ring gear, 1962-67 slant six (with 1.96" crankshaft flange register), neutral balance, resurfaced, ring gears inspected, ready to install.

Flywheel counter balance weight, used to convert McLeod flywheel FW102 from neutral balance to 1972-73 340 motors with cast crankshaft/external balance. Weight package with mounting screws.

Flywheel counter balance weight, used to convert McLeod flywheel FW102 from neutral balance to 360 crate/magnum motor with cast crankshaft/external balance. Weight package with mounting screws.

Flywheel counter balance weight, used to convert McLeod flywheel FW102 or FW202 from neutral balance to 360 (non-magnum) motor with cast crankshaft/external balance. Weight package with mounting screws.

Flywheel counter balance weight, used to convert McLeod flywheel FW102 or FW202 from neutral balance to 383-400-440 motor with cast crankshaft/external balance. Weight package with mounting screws.