MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

NOS 23 spline input shaft, 24 tooth drive gear (one small identifying groove on tips of teeth). Fits 1975-80 overdrive transmissions with 1st design high helix gear fine pitch. Reference 3878647 T833-16E

NOS 2400436 Input shaft for 1963 Borg Warner T10 4-speed transmission, 27 tooth, for 361-383 equipped cars.

NOS 2400874 Input shaft for 1963 Borg Warner T10 4-speed transmission, 25 tooth, for 318 equipped cars.

NOS 23 spline input shaft, 27 tooth drive gear, yellow stripe NASCAR, reference SK9439.

Reconditioned 18 spline input shaft, 22 tooth drive gear, 2.44 to 1 first gear ratio. Fits 1971-2 B/E-body 18 spline "Hemi" transmissions. As available. Reference 3410402 WT294-16D

New 23 spline input shaft, 25 tooth drive gear, 2.47 to 1 first gear ratio. Fits late 1970-74 B/E-body and late 1970-74 A-body transmissions. Reference 3410409 WT294-16C

NEW 18 spline input shaft, 21 tooth drive gear, 2.65 to 1 first gear ratio. Fits 1966-1970 B/E-body 18 spline "Hemi" transmissions. Reference 2538196 2538698 WT294-16B. Also works with Red Stripe gearset, reference P2892320.

New 23 spline input shaft, 24 tooth drive gear, 2.66 to 1 first gear ratio. Fits 1964-70 B-body, 1970 E-body, 1966-1970 A-body transmissons. Reference 2466406 WT294-16

New 23 spline input shaft, 22 tooth drive gear, 3.09 to 1 first gear ratio. Fits 1964-65 A-body transmissions, some early 70's A-body transmissions, and 1978 and later overdrive transmissions with 2nd design gear pitch. Same as IS-OD22. Reference 2464658 WT294-8A and 2466427 WT294-16A 3743690 T833-16F

Reconditioned 23 spline input shaft, 18 tooth drive gear. Fits A230 3-speed transmissions.

Reconditioned 23 spline input shaft, 18 tooth drive gear, with two identifying grooves on tooth tip. Fits A230 3-speed transmissions.

Replacement rubber grommets for all Inland shift handles (where handle attaches to the shifter mechanism). Set of 3.

Input shaft micro repair sleeve, thin sleeve fits over pitted/rusted or worn pinion seal area. Fits all 18 spline "Hemi" transmissions.

1970 340 six pack AAR & T/A throttle pressure/kickdown linkage kit, for 727 torque flite transmission equipped cars. Single rod kit contains all parts needed, including throttle cable bracket and return spring bracket.

1968-70 340 throttle pressure/kickdown linkage kit, for 727 torque flite transmission equipped cars and AVS carb. 3 piece rod kit contains all parts needed, including throttle cable bracket and return spring bracket.

1969-70 383 4 barrel throttle pressure/kickdown linkage kit, for 727 torque flite transmission equipped cars. 3 piece rod kit contains all parts needed, including throttle cable bracket and return spring bracket.

1967-UP A-body 383 4 barrel throttle pressure/kickdown linkage kit, for 727 torque flite transmission equipped cars. 3 piece rod kit contains all parts needed, including throttle cable bracket and return spring bracket.

1969-70 440 4 barrel throttle pressure/kickdown linkage kit, for 727 torque flite transmission equipped cars. 3 piece rod kit contains all parts needed, including throttle cable bracket and return spring bracket.

1971 440 six pack throttle pressure/kickdown linkage kit, for 727 torque flite transmission equipped cars. 1 piece rod kit contains all parts needed, including throttle cable bracket and return spring bracket.

1969-70 440 six pack throttle pressure/kickdown linkage kit, for 727 torque flite transmission equipped cars. 3 piece rod kit contains all parts needed, including throttle cable bracket/spring and return spring/bracket.